As an Amazon Associate I earn from qualifying purchases.
1. Monstrum #ad
Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 1 inch Diameter | Black #adMonstrum #ad
- Dual ring scope mount for mounting standard 1 inch tube rifle scopes. Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.
2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position. 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2. 5 inches of spacing between the rings. Mounts to any flat top Picatinny rail equipped rifle.
2. Vortex #ad
High Height 1.22 in, Vortex Optics Hunter 1-inch Riflescope Rings #adVortex #ad
- These vortex hunter rings position the center of the riflescope tube at a height of 1. 22 inches 31. 0 mm from the base. Sold two rings per package.
Mounting to a picatinny or weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Made from aircraft-grade 6061-T6 aluminum for optimum strength.
|Manufacturer||Vortex Optics #ad|
3. AERO PRECISION #ad
Anodized Black, Model Number: APRA210100, Aero Precision Ultralight 1" Standard Scope Mount #adAERO PRECISION #ad
- 15 in-lbs screw Torque. Mil-spec 1913 picatinny Rails Upper Receiver. 6061 t6 extruded Aluminum Construction. Standard Scope Mount Profile. Included components: Scope mount, Torx screws. Anodized Black.
4. Monstrum #ad
Monstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.35 inch Height #adMonstrum #ad
- 1. 35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount. 1 inch diameter rings for mounting standard 1 inch rifle scope tubes. Available in four heights to match your needs: 080 inch, 1.
20 inch, 1. 00 inch, and 1. 35 inch. Monstrum tactical precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld. Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
5. Modkin #ad
Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail 1 inch, Set of 2, Modkin Scope Rings #adModkin #ad
- High profile, 071 inch gap from base of mount to bottom of rings. Double scope ring mount for Picatinny/ Weaver Rail 21mm. Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily. Item height: 2 inch. The ring is for most scopes which are in 1 inch / 25. 4mm scope tube.
6. Monstrum #ad
Monstrum Offset Cantilever Dual Ring Scope Mount | 1 inch Diameter | Black #adMonstrum #ad
- Dual ring scope mount for mounting standard 1 inch tube rifle scopes. Lightweight 6061 grade aluminum construction. All monstrum Tactical optics mounts come with a lifetime guarantee.
Mounts to any flat top Picatinny rail equipped rifle. 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
7. Vortex #ad
2-Inch Offset, Vortex Optics Sport Cantilever 1-Inch Mount #adVortex #ad
- The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement. The cantilever ring mount positions the center of the riflescope tube at a height of 1.
59 inches 4039 mm from the base. Weighs 6. 7 ounces. Aluminum construction. Use this cantilever mount for mounting 1-inch telescopic sights.
|Manufacturer||Vortex Optics #ad|
|Warranty||Unlimited, unconditional lifetime warranty.|
8. Burris #ad
Black , 1", 410343, Burris Optics 410342, 410344 P.E.P.R. Riflescope Mount, Featuring Picatinny Ring Tops, Ideal Mounting Solution #adBurris #ad
- Sport type: Hunting. Product Possess High Durability. Made of high Quality Materials. Material Type: Aluminum.
|Manufacturer||Burris Optics #ad|
|Warranty||Burris Forever Warranty - We will repair or replace your Burris mount if it is damaged or defective. The warranty is automatically transferred to future owners. No repair or replacement charge. No warranty card needed. No receipt needed. No questions asked. The Burris Forever Warranty does not cover loss, theft, deliberate damage or cosmetic damage that does not hinder the performance of the product.|
9. Monstrum #ad
Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 1 inch Diameter | Black #adMonstrum #ad
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount. 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening. Dual ring scope mount for mounting standard 1 inch tube rifle scopes to Picatinny equipped rifles. 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2. 5 inches of spacing between the rings.