1. Modkin
#ad
Modkin 11mm Dovetail Scope Mounts for 1'' Scope Tube High Profile for Airguns or Premium .22 Rifles Set of 2
#adModkin #ad - Lightweight: 1. 15oz per ring. Precision and Repeatable Alignment. The ring is for most scopes which are in 1''/ 25. 4mm scope tube. Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.More information #ad
Item height: 1. 97''. With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. High profile, 20mm/079in gap from base of mount to bottom of rings. Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/. 22 rails.Brand | Modkin #ad |
Manufacturer | Modkin #ad |
Part Number | l029 |
More information #ad
2. UTG
#ad
1" Dia, UTG 1PC Medium Profile Airgun Mount with Stop Pin
#adUTG #ad - Ring base designed with locking Hex Screws to Tightly Fit on Mounts with Airgun/. 22 dovetail Dimensions. Precision machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish.More information #ad
Reversible locking plate to Fit Full Range of Airgun/. 22 rails. Complete with Stop-Pin for Rock Solid Application.Brand | UTG #ad |
Manufacturer | UTG #ad |
Height | 1.69 Inches |
Length | 5.12 Inches |
Weight | 0.39 Pounds |
Width | 1.89 Inches |
Part Number | RGPM2PA-25M4 |
Model | RGPM2PA-25M4 |
More information #ad
3. MIZUGIWA
#ad
MIZUGIWA One Piece High Profile Magnum Airgun Scope Mount with Stop Pin
#adMIZUGIWA #ad - Fits all scopes with a one inch body tube. 4 clamping screws, 11mm Dovetail. One piece scope mount with Integral two 1" Rings. Great for use on high power magnum air rifles. Threaded stop pin can be easily activated.More information #ad
Brand | MIZUGIWA #ad |
Manufacturer | Mizugiwa (BJ) Co.,Ltd #ad |
Weight | 130 Grams |
Part Number | MH0164 |
More information #ad
4. Accu-Shot
#ad
UTG 1"/2PCs High Profile Airgun Rings w/Stop Pin
#adAccu-Shot #ad - Beware counterfeit products not sold by amazon. Com. Reversible locking plate to Fit Full Range of Airgun/. 22 rails. Ring base designed with locking Hex Screws to Tightly Fit on Mounts with Airgun/.More information #ad
22 dovetail Dimensions. Complete with Stop-Pin for Rock Solid Application. Precision machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish.Brand | Accu-Shot #ad |
Manufacturer | Leapers Inc #ad |
Height | 1 Inches |
Length | 1 Inches |
Weight | 7 ounces |
Width | 1 Inches |
Part Number | RGPM-25H4 |
Model | RGPM-25H4 |
Warranty | See manufacturer |
More information #ad
5. UTG
#ad
UTG 1PC High Profile Airgun Mount with Stop Pin, 1" Dia
#adUTG #ad - Ring base designed with locking Hex screws to tightly fit on mounts with airgun/. 22 dovetail dimensions. Reversible locking plate to fit full range of airgun/.More information #ad
22 rails. Complete with stop-pin for rock solid application. Precision machined from Aircraft-grade aluminum alloy with anodized black matte finish.Brand | UTG #ad |
Manufacturer | Pro-Motion Distributing - Direct #ad |
Height | 1.69 Inches |
Length | 5.12 Inches |
Weight | 0.4 Pounds |
Width | 2.13 Inches |
Part Number | FBA_RGPM2PA-25H4 |
Model | RGPM2PA-25H4 |
More information #ad
6. Instapark
#ad
Instapark Riflescope Mount for Magnum Airgun High Profile 1 inch One Piece with Dual Rings Lock Down Multi-Bolt 5 Screw Scope Mount with Stop Pin
#adInstapark #ad - Even after many rounds, your scope will not budge. Accommodates 1-inch rifle scope tubes. Multi-bolt clamping bar with 5 screws, for an increased shockproof clamping surface to spread bolt torque over a greater area, to ensure a secure fit; even under recoil when shooting.More information #ad
Dual scope rings with four lug screws, for maximum solid holding power. Aircraft grade aluminum alloy construction with a sleek black finish, that will look good. Perfect for mounting your scope for eye relief and maintaining a proper shooting position.Brand | Instapark #ad |
Manufacturer | Instapark #ad |
Height | 2 Inches |
Length | 4.75 Inches |
Weight | 0.25 Pounds |
Width | 1.75 Inches |
Part Number | GS-1005 |
Model | GS-1005 |
More information #ad
7. UTG
#ad
Dovetail to Picatinn Adaptor Mount, UTG Leapers MNT-PMTOWL-A Inc, Black
#adUTG #ad - Compatible with most 9mm - 11mm, flat or rounded, airgun/shotgun dovetail rails. Recoil resistant stop pin aids in additional zero retention against bidirectional recoil force typical of spring Operated airguns.More information #ad
Precision machined from aircraft grade aluminum and finished in a matte black hard coat anodize.Brand | UTG #ad |
Manufacturer | Leapers, Inc. #ad |
Height | 1 Inches |
Length | 7 Inches |
Weight | 0.06 Pounds |
Width | 3 Inches |
Part Number | MNT-PMTOWL-A |
Model | MNT-PMTOWL-A |
Warranty | Limited Lifetime |
More information #ad
8. LIRISY
#ad
LIRISY 1" Scope Mount Low Profile Scope Rings for 11mm Dovetail Rails 2 Pieces
#adLIRISY #ad - Scope rings type: medium profile 14mm, fit for a. 22 rifle or an air rifle using a 3/8" or 11mm dovetail mount. One of the rings has a stop pin the bottom of it for rock solid application. Pack in lirisy exclusive design packing box, good gift to your boy friend, make it different and special, father, grandfather.More information #ad
Scope rings are for standard riflescopes 25. 4mm scope tube. With four screws design, it will hold the scope more securly than a single screw on both sides.Brand | LIRISY #ad |
Manufacturer | ASIN #ad |
Part Number | LY0003 |
More information #ad
9. GoldCam
#ad
Pack of 4, GoldCam 1'' Dovetail Scope Rings, 2Pcs High Profile + 2Pcs Medium Profile 1 Inch Scope Mount Rings for 11mm Dovetail Rails
#adGoldCam #ad - Built-in tape protection & with stop-pin design built-in tape inside per rings to prevent from marring the Scope, Also Prevent Sliding and Holding Postion Accurately. One of the high rings and one of the medium rings have A Stop Pin The Bottom, Which Prevents The Ring From Sliding Once Set.Comes with 2 Pcs Allen Wrench. Rail clamp screws design & easy to installwith 2 rail clamp screws and 4 scope clamp screws per ring, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 11mm Dovetail Rail, ensure mount any 1'' Scope Firmly, Simple and Quick To Remove Or Install.
More information #ad
Our scope rings perfect for 3/8'' or 11mm dovetail rails, available in two styles For Your Choose, A Must Have Scope Rings for Hunting Shooting! Perfect for Mounting Most Scopes Which Are In 1''/ 25. 4mm scope Tube. 4 set of two styles 1'' scope rings2 pcs medium profile - 055'' gap from base of mount to bottom of ring - item height 1. 77'' - dimension: 1. 61*1. 77*083 inch - weight: 1. 55 oz per ring; 2 Pcs High Profile - 0
Brand | GoldCam #ad |
Manufacturer | GoldCam #ad |
Height | 0.83 Inches |
Length | 1.61 Inches |
Width | 2 Inches |
More information #ad