As an Amazon Associate I earn from qualifying purchases.



With long eye relief and an ultra-forgiving eye box, you'll be able to quickly get a sight picture and acquire your target. Capped reset turrets are finger adjustable with MOA clicks that can be reset to zero after sighting in.
The 1-4x24 crossfire ii riflescope is one of many configurations in the Crossfire II line. A single piece tube constructed from aircraft grade aluminum ensures strength and shockproof performance. Weighs 6. 7 ounces. The v-brite reticle uses the v-Plex format with battery-powered electronics to illuminate the center dot for hunters/shooters during extra-low light conditions.

Dual stream video recording - you asked and we listened ThOR 4 not only Streams Video to your mobile device at HD resolution and can simultaneously Record to the SD card inside. Helps you determine exact ballistics for expert long-range shots.
Ballistic calculator- hunt responsibly by making sure your shot hits the target Each and Every time. Just relax and focus on your game and let the Obsidian Core do the heavy lifting. Ultra low power profile - no more worries about your batteries dying in the field. This scope will automatically start to record a video before and after you take a shot.

Smart rangefinder - range your target in just 2 clicks and get the precise distance measurement in the blink of an eye. Ballistic calculator feature makes every shot a kill. No extra gadgets required. Point of impact is adjusted automatically with consideration of ammo type, range to target and environmental data.


Positioning - independent, intentional and non-orientated leg positioning allows either hand to move leg into any of the five leg positions.

1. American Defense Mfg.
#ad
Black, American Defense AD-RECON 30 STD Riflescope Optic Mount
#adAmerican Defense Mfg. #ad - Can be adjusted with your finger or a flat blade screwdriver. Lever can be configured to lock to the front or the rear. The ad-recon works with scopes with Objective Housings as large as 2.More information #ad
2 inch. Does not require proprietary tools for adjustment. Superior clamping surface to insure maximum rail engagement.Brand | American Defense Mfg. #ad |
Manufacturer | American Defense Mfg #ad |
Height | 4 Inches |
Length | 4 Inches |
Weight | 10 Pounds |
Width | 4 Inches |
Part Number | AD-RECON 30 STD |
Model | AD-RECON 30 STD |
More information #ad
2. American Defense Mfg.
#ad
American Defense AD-Recon-H 30 STD Riflescope Optic Mount, Black
#adAmerican Defense Mfg. #ad - Does not require proprietary tools for adjustment. Lever can be configured to lock to the front or the rear. Can be adjusted with your finger or a flat blade screwdriver. Superior clamping surface to insure maximum rail engagement.More information #ad
Brand | American Defense Mfg. #ad |
Manufacturer | American Defense Mfg #ad |
Part Number | AD-RECON-H 30 STD |
Model | AD-RECON-H 30 STD |
More information #ad
3. Midwest Gloves
#ad
Midwest Industries 30mm QD Scope Mount with 1.5" Offset
#adMidwest Gloves #ad - This is a nationwide distributor of firearms and shooting sports accessories. Midwest industries, 30mm, qd scope mount, with 1.5" offset, Black Finish. The country of origins United States.More information #ad
Brand | Midwest Gloves #ad |
Manufacturer | RSR Group, Inc #ad |
Weight | 0.71 Pounds |
Part Number | MWMI-QD30SM |
Model | MWMI-QD30SM |
More information #ad
4. Vortex
#ad
SFP Riflescope, V-Brite Illuminated Reticle MOA with Sport Cantilever 30mm Mount, 2-Inch Offset, 30mm Tube, Vortex Optics Crossfire II 1-4x24
#adVortex #ad - The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on your rifle at a height of 1. 59 inches 4039 mm from the base. O-ring sealed and nitrogen purged, the Crossfire II delivers waterproof and fogproof performance.With long eye relief and an ultra-forgiving eye box, you'll be able to quickly get a sight picture and acquire your target. Capped reset turrets are finger adjustable with MOA clicks that can be reset to zero after sighting in.
More information #ad
The fast focus eyepiece allows quick and easy reticle focusing. Anti-reflective, fully multi-coated lenses provide bright and clear views for the user. The 1-4x24 crossfire ii riflescope is one of many configurations in the Crossfire II line. A single piece tube constructed from aircraft grade aluminum ensures strength and shockproof performance. Weighs 6. 7 ounces. The v-brite reticle uses the v-Plex format with battery-powered electronics to illuminate the center dot for hunters/shooters during extra-low light conditions.
Brand | Vortex #ad |
Manufacturer | Vortex Optics #ad |
Height | 6.9 Inches |
Length | 12.2 Inches |
Weight | 1.5 Pounds |
Width | 10.3 Inches |
Part Number | CF2-31037 & CM-202 |
Warranty | Unlimited, unconditional lifetime warranty. |
More information #ad
5. ATN
#ad
ATN Thor 4, Smooth zoom and Smartphone controlling thru iOS or Android Apps, Thermal Rifle Scope with Full HD Video rec, GPS, WiFi
#adATN #ad - At 16+hours of continuous operation the ATN ThOR 4 will last as long as you do. Range, temperature, angle to target, Wind, Multiple-Weapon Profile, Humidity, Plus more. Rav recoil activated video - takes care of all your worries.Dual stream video recording - you asked and we listened ThOR 4 not only Streams Video to your mobile device at HD resolution and can simultaneously Record to the SD card inside. Helps you determine exact ballistics for expert long-range shots.
More information #ad
Ultra sensitive next gen sensor - is capable of capturing crisp clear images at the furthest ranges with improved resolution, higher sensitivity, and smooth gradations even in total darkness. Ballistic calculator- hunt responsibly by making sure your shot hits the target Each and Every time. Just relax and focus on your game and let the Obsidian Core do the heavy lifting. Ultra low power profile - no more worries about your batteries dying in the field. This scope will automatically start to record a video before and after you take a shot.
Brand | ATN #ad |
Manufacturer | American Technology Corp (ATN) #ad |
Height | 3 Inches |
Length | 14.8 Inches |
Weight | 2.35 Pounds |
Width | 3 Inches |
Part Number | TIWST4644A |
Model | TIWST4644A |
Warranty | See manufacturer |
More information #ad
6. theOpticGuru
#ad
ATN Thor 4 384x288, Gallery & Controls, Smooth Zoom, Bluetooth and Wi-Fi Streaming, 1.25-5x Thermal Scope w/ Video rec in HD
#adtheOpticGuru #ad - Obsidian iv dual core processor and gen 4 thermal Sensor - an ideal combination to satisfy your hunting needs. No more lost opportunities due to drained batteries.Smart rangefinder - range your target in just 2 clicks and get the precise distance measurement in the blink of an eye. Ballistic calculator feature makes every shot a kill. No extra gadgets required. Point of impact is adjusted automatically with consideration of ammo type, range to target and environmental data.
More information #ad
Choose between black-and-white or bright color palettes in HD resolution. Ultra low power consumption - over 16 hours of active use. Dual stream video recording - wifi Streaming and Video Recording now can be turned on simultaneously with no negative effect on performance.Brand | theOpticGuru #ad |
Manufacturer | ATN Corp #ad |
Height | 3 Inches |
Length | 13.1 Inches |
Weight | 1.94 Pounds |
Width | 3 Inches |
More information #ad
7. Atlas Bipods
#ad
Authentic Atlas Bipod BT46LW17 w/ ADM 170-S Lever w/ Bonus Hook & Loop USA Black Flag Patch
#adAtlas Bipods #ad - Bonus item: american flag black pvc velcro patch Included! Mounts directly to any 1913 style Picatinny Rail via Included ADM 170-S Lever. Weight: 13. 61 oz. Height range approximately 4. 75" – 9. 0".More information #ad
Brand | Atlas Bipods #ad |
Manufacturer | B & T Industries #ad |
Part Number | BT46LW17-STD-FLAG |
More information #ad
8. Atlas
#ad
Black, Atlas V8 BT10 Bipod, Standard Two Screw 1913 Rail Clamp
#adAtlas #ad - Stabilization – the atlas bipods feature standard soft, durable Rubber feet that are suitable for many surfaces. Made of high-quality material - it is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components.Positioning - independent, intentional and non-orientated leg positioning allows either hand to move leg into any of the five leg positions.
More information #ad
Manufacturer – these atlas bipods are proudly designed, engineered, machined and assembled in America. Fit - atlas bt10 v8 atlas bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.Brand | Atlas #ad |
Manufacturer | Atlas #ad |
Weight | 11 ounces |
Part Number | BT10 |
Model | BT10 |
Warranty | Limited lifetime manufacturer warranty |
More information #ad
9. AERO PRECISION
#ad
APRA210600, SPR, Aero Precision Ultralight 30MM Scope Mount, Black
#adAERO PRECISION #ad - Ridged and lightweight; Made in the USA. Designed for mil-spec upper receivers with 1913 Picatinny rail. 6061 t6 extruded aluminum construction. Mounting rings are pushed forward 2" for better eye relief. Mil-a-type 3 black hard-coat anodize.More information #ad
Brand | AERO PRECISION #ad |
Manufacturer | Aero precision #ad |
Height | 4 Inches |
Length | 4 Inches |
Weight | 0.21 Pounds |
Width | 4 Inches |
Part Number | FBA_AP210600 |
Model | APRA210600 |
More information #ad