As an Amazon Associate I earn from qualifying purchases.
DORHEA #ad - The bme280 sensor is precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and the pressure measurements are good, and temperature with ±1. 0°c accuracy. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.
Interface: I2C up to 3. 4mhz; spi up to 10 MHz. The bme280 sensor is a precision sensor, is soldered onto PCB, not only the pressure and the temperature, this sensor can measure humidity.
For simple easy wiring, go with I2C. The bme280 stmospheric pressure sensor is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings. Because pressure changes with altitude, you can also use it as an altimeter with ±1 meter accuracy. Gy-bme280-3. 3 use i2c and spi supports 3-, 4-wire spi interface.
Bicool #ad - Dimension: 27mm x 20mm. A tiny sensor breakout with bme280 onboard, the bme280 environmental sensor is suited for applications such as environment monitoring, also is compatible with 3.
ACEIRMC #ad - Can be used as a simple max4409 or bme280 module, chip I2C communication. Connect android phone through bluetooth module or connect computer with UTB to TTL module, and computer software can save data analysis. 4 in 1 weather station module light intensity + temperature humidity + atmospheric pressure module.
DIYmall #ad - The bme280 is a great new chip which was originally designed for the next generation of smartphones. With an i2c connection you have access to enough weather data to make some pretty good predictions for your local area.
Comimark #ad - It uses both i2c and spi supports 3-, 4-wire SPI interface. If you are not satisfied with your purchase for any reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply.
Mixse #ad - It uses both i2c and SPI Interface. Not only the pressure and The Temperature, This Sensor Can Measure Humidity. Bme280, the precision sensor From, Is Soldered Onto PCB. Package:1pcs bmE280 Precision Sensor.
KNACRO #ad - Supply voltage vdd main supply voltage range: 1. 71 v to 3. 6 v. Current consumption 1. 8 ua @ 1 hz humidity and temperature.
1. DORHEA
#adDORHEA 2Pcs BME280 3.3V Temperature Humidity Atmospheric Barometric Pressure Sensor Module GY-BME280-3.3 IIC I2C Breakout Board
#adInterface: I2C up to 3. 4mhz; spi up to 10 MHz. The bme280 sensor is a precision sensor, is soldered onto PCB, not only the pressure and the temperature, this sensor can measure humidity.
More information #ad
Temperature humidity module is great for all sorts of weather sensing and can even be used in both I2C and SPI. For simple easy wiring, go with I2C. The bme280 stmospheric pressure sensor is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings. Because pressure changes with altitude, you can also use it as an altimeter with ±1 meter accuracy. Gy-bme280-3. 3 use i2c and spi supports 3-, 4-wire spi interface.
| Brand | DORHEA #ad |
| Manufacturer | DORHEA #ad |
| Part Number | 14833-1 |
More information #ad
2. Bicool
#adWaveshare BME280 Environmental Sensor Temperature Humidity Barometric Pressure Atmospheric Pressure Support I2C and SPI Interface Compatible with 3.3V/5V Voltage Levels
#adMore information #ad
3v/5v voltage levels. Due to its ultra small form factor, low power consumption, altimeter, and barometric pressure. Barometric pressure sensing: 300~1100 hPa resolution 018pa, accuracy ±1hPa. Power consumption: | Brand | Bicool #ad |
| Manufacturer | Bicool #ad |
| Part Number | BME280 Environmental Sensor |
| Model | BME280 Environmental Sensor |
More information #ad
3. ACEIRMC
#adACEIRMC MAX44009 BME280 MCU Light Intensity Temperature Humidity Atmospheric Pressure 4 in One Integrated Sensor Module GY-39 MCU IIC Serial IIC Bus 3-5V for Weather Station
#adMore information #ad
Communication mode: mcu_iIC/MCU_ serial port / sensor chip serial port. The mcu on the module can read all kinds of data, and the MCU can output the calculated practical data directly after calculation, and support serial port / I2C.| Brand | ACEIRMC #ad |
| Manufacturer | ACEIRMC #ad |
| Part Number | 16630 |
More information #ad
4. DIYmall
#adDIYmall BME280 Humidity Temperature Sensor Barometric Pressure Sensor Module with IIC/I2C for Arduino GY-BME280-5V
#adMore information #ad
What you will get is: 1 X Bme280 Sensor module. Voltage:3-5V. Document link: https://drivedotgoogledotcom/file/d/0B8DSGdAr8_31WWp4cHh1UkJuSnc/view?usp=sharing.| Brand | DIYmall #ad |
| Manufacturer | DIYmall #ad |
| Height | 0.59 Inches |
| Length | 0.98 Inches |
| Weight | 0.01 Pounds |
| Width | 0.08 Inches |
| Part Number | FZ1639-BME280 |
| Model | BC26852 |
More information #ad
5. Comimark
#adComimark 2Pcs Breakout Temperature Humidity Barometric Pressure BME280 Digital Sensor Module for Arduino
#adMore information #ad
Bme280, the precision sensor from It, is soldered onto PCB. Package included: 2 x breakout Temperature Humidity Barometric Pressure BME280 Digital Sensor Module. Not only the pressure and the temperature, this sensor can measure humidity.| Brand | Comimark #ad |
| Manufacturer | Comimark #ad |
| Part Number | LY389 |
| Model | LY389 |
More information #ad
6. Mixse
#adMixse Bme280 Pressure Temperature Sensor Module Kits with IIC I2C for Arduino UNO 1pcs
#adMore information #ad
| Brand | Mixse #ad |
| Manufacturer | Mixse #ad |
| Part Number | BME280 |
| Model | BME280 |
More information #ad
7. KNACRO
#adKNACRO GY-BME280-3.3 BME280 3.3v High Precision Atmospheric Pressure Sensor Module
#adMore information #ad
Digital interface i2c up to 3. 4 mhz and spi 3 and 4 wire, up to 10 MHz. Package 2. 5 mm x 2. 5 mm x 093 mm metal lid LGA. Vddio interface voltage range: 1. 2 v to 3. 6 v.| Brand | KNACRO #ad |
| Manufacturer | KNACRO #ad |
| Part Number | BME280 |
More information #ad
