As an Amazon Associate I earn from qualifying purchases.
MotorGuide #ad - Extends controls for better speed selection. Locks into place to fit transom-mount trolling motors and most popular tiller engines. Black finish. 24 inch adjustable extension.
Ironwood Pacific #ad - Fits gas and electric outboard boat trolling motors 15HP and under; designed for trolling speeds only. Anodized aluminum, corrosion resistant fittings and unbreakable nylon clamp are designed to last.
Newport Vessels #ad - Quality & reliability: all newport motors are made to high quality stainless steel, magnesium, and zinc hardware to withstand fresh water and salt water environments. We stand behind every product we make with industry leading customer service and a 2 year warranty.
The motor also includes a 50amp circuit breaker which is recommended at all times to protect from battery voltage surges. Speed: this motor has 8 speeds, 5 forward and 3 reverse. The mount angle, a 6 inch telescoping tiller handle, a 5 LED battery meter, and direction can all be adjusted and locked into place when needed.
The motor is designed for trolling, water, weight, wind, so the top speed of this motor is about 4mph, but depends on your boat shape, and other factors. Max amp draw: 52A. Our 3 blade propeller gives the motor great low end torque to get the boat moving. Features: this motor features a 30 inch shaft, height, and 3 blade propeller. Battery: the nv 55lb motor requires one 1 12v lead-acid deep cycle or lithium deep Cycle battery battery not included, 50ah recommended.
Simple 15-minute installation, hardware included. Increase performance and safety. Designed by an aeronautical engineer, Doel Fin is a true hydrofoil.
Pactrade Marine #ad - Dimension: length: 18", diameter: 2", and diameter of the aluminum tube: 1-1/8". It is lightweight and durable, and it is easy to be installed.
Pactrade Marine #ad - This is an telescopic trolling Motor Extension Handle that can be extended from 17" to 25". Dimension: length: 17"-25", diameter: 2", and Diameter of the aluminum tube: 1-1/8".
Bullnose Products #ad - It measures 105" high x 4. 75" wide and fits a 1 1/8" shaft diameter. Quality - it is a newly manufactured product on the market to help ensure you have a stress-free fishing experience. Only takes a few minutes to install and you are ready to go. Your bow mount setup needs to have 1' of shaft sticking out from the end of the platform allowing enough space to attach the rudder.
Customers have also said, “it prevents the boat from spinning as much when the motor is off”. The bow mount motor must be a hand cable pull, MAXXUM, a hand cable pull will allow you to carefully bring the motor up out of the water on the motor mount.
Essential - in most cases it helps hold a true course at both a slow and high trolling speeds. Common tiny boats used are, jon boats, newport vessel trolling motor, canoes, fishing kayak, motorguide trolling motors, Pelican Bass Raider 10E, inflatable pontoon, and more. It's most commonly used for "but not limited to" minn kota trolling motor, etc. However, edge, and FORTREX. Bow mount - fits the minn kota, not self deploy. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all.
Minn Kota #ad - Power prop: for 3-1/4" motor diameters, this prop delivers extra power to push throw heavy vegetation. Includes prop pin, nut and washer. Telescoping tiller: get easy, comfortable, intuitive operation of your trolling motor with the six-inch telescoping tiller.
It's a minn kota exclusive, and we guarantee it for life. Lever lock bracket: this solid 10-position bracket features a quick-release lever lock and reinforced composite material that resists flexing, warping, and UV damage.
1. MotorGuide
#adMotorGuide MGA503A1 Universal Telescoping Tiller — Extension Handle for Hand-Operated Trolling Motors — 24-Inch — Black
#adMore information #ad
Easy to install. Maintains full throttle and steering functions. The product measures 14 Inch. Universal fit accommodates most tiller and trolling motor handles. Extends reach for better control of the motor.| Brand | MotorGuide #ad |
| Manufacturer | MotorGuide #ad |
| Height | 2.25 Inches |
| Length | 20.25 Inches |
| Weight | 0.69 Pounds |
| Width | 4.87 Inches |
| Part Number | MGA503A1 |
| Model | MGA503A1 |
More information #ad
2. Ironwood Pacific
#adIronwood Pacific HelmsMate Tiller Extension U-Joint
#adMore information #ad
Universal-joint extendable model; 37”-51” length. Full steering and throttle control while sitting away from the motor - improve comfort and balance in fishing, pontoon, and other boats. Universal-joint extendable model; 37”-51” length. Made in usa with a lifetime warranty.| Brand | Ironwood Pacific #ad |
| Manufacturer | Ironwood Pacific Outdoors #ad |
| Height | 2 Inches |
| Length | 35 Inches |
| Weight | 1 Pounds |
| Width | 9 Inches |
| Part Number | 001.0 |
| Model | N/A |
More information #ad
3. Newport Vessels
#adNewport Vessels NV-Series 55lb Thrust Saltwater Transom Mounted Trolling Electric Trolling Motor w/ LED Battery Indicator & 30" Shaft 23M1000203
#adThe motor also includes a 50amp circuit breaker which is recommended at all times to protect from battery voltage surges. Speed: this motor has 8 speeds, 5 forward and 3 reverse. The mount angle, a 6 inch telescoping tiller handle, a 5 LED battery meter, and direction can all be adjusted and locked into place when needed.
More information #ad
Efficient power: 55lb thrust - this 12v electric trolling motor provides excellent power and efficiency for any boater. The high quality build allows the motor to run all day long without overheating, or making noise to spook fish. The motor is designed for trolling, water, weight, wind, so the top speed of this motor is about 4mph, but depends on your boat shape, and other factors. Max amp draw: 52A. Our 3 blade propeller gives the motor great low end torque to get the boat moving. Features: this motor features a 30 inch shaft, height, and 3 blade propeller. Battery: the nv 55lb motor requires one 1 12v lead-acid deep cycle or lithium deep Cycle battery battery not included, 50ah recommended.
| Brand | Newport Vessels #ad |
| Manufacturer | Torero Imports LLC #ad |
| Height | 7 Inches |
| Length | 47 Inches |
| Weight | 23.2 Pounds |
| Width | 21 Inches |
| Part Number | 23M1000203 |
| Model | 23M1000203 |
| Warranty | 2 year manufacturer |
More information #ad
4. Minn Kota
#adMinn Kota 1854107 MKA-43 Transom Mount Trolling Motor Telescopic Extension Handle 17-25 Inch
#adMinn Kota #ad - Experience total speed and steering control. Goes from 17" to 25". No tools required to install. Fits all outboard and trolling motors.More information #ad
| Brand | Minn Kota #ad |
| Manufacturer | Johnson Outdoors #ad |
| Height | 3 Inches |
| Length | 30.5 Inches |
| Weight | 0.85 Pounds |
| Width | 5 Inches |
| Part Number | 031702 |
| Model | 1854107 |
| Warranty | Manufacturer Warranty |
More information #ad
5. Davis Instruments
#adDavis Doel-Fin Outboard/Outdrive Stabilizer, Black
#adDavis Instruments #ad - Doel-fin improves overall performance - even on boats with well designed hulls. Promotes fast out-of-the-hole times. Save up to 30% on fuel consumption.Simple 15-minute installation, hardware included. Increase performance and safety. Designed by an aeronautical engineer, Doel Fin is a true hydrofoil.
More information #ad
Increases fuel efficiency and reduce bow rise. Maintain lower planning speeds. Faster out-of-the-hole for happier water skiers and wake boarders. Doel-fin fits all newer outboard and stern drive motors from 5 horsepower, except Volvo Penta outdrives. Simple 15 minute installation hardware included.| Brand | Davis Instruments #ad |
| Manufacturer | Davis Instruments #ad |
| Height | 11 Inches |
| Length | 14 Inches |
| Weight | 1.8 Pounds |
| Width | 16 Inches |
| Part Number | 5001211 |
| Model | SS-SMS-5001211 |
| Warranty | Manufacturer Warranty |
More information #ad
6. Pactrade Marine
#adPactrade Marine Boat Trolling Motor Outboard Extension Handle Anodized Aluminum Fixed 18
#adMore information #ad
This is a non-extendable trolling motor extension handle that has a fixed length of 18". This extension handle provides additional extension for convenient operation.| Brand | Pactrade Marine #ad |
| Manufacturer | Pactrade Marine #ad |
| Height | 2 Inches |
| Length | 18 Inches |
| Width | 2 Inches |
| Part Number | PM616028 |
| Model | PM616028 |
More information #ad
7. Marine Dynamics
#adMarine Dynamics Hydro Tail Junior Stingray, Black
#adMarine Dynamics #ad - Package width: 39. 37 cm. Product type: sportiNG GOODS. Installation instructions:warning: with all engine installations, ensure boat engine is off, kill switch is disengaged, and gear shift iS IN NEUTRAL POSITION.More information #ad
This product is specifically designed for small boats, it adjustable for any size motor from 1-1/2 to 40 HP. Package height: 3. 048 cm. Package length: 43. 18 cm.| Brand | Marine Dynamics #ad |
| Manufacturer | Marine Dynamics #ad |
| Weight | 2.1 Pounds |
| Part Number | JR-1 |
| Model | JR-1 |
More information #ad
8. Pactrade Marine
#adPactrade Marine Boat Trolling Motor Telescopic Extension Handle Anodized Auminum 17"-25"
#adMore information #ad
It is lightweight and durable, and it is easy to be installed. Item: pm616125. This extension handle provides additional extension for convenient operation.| Brand | Pactrade Marine #ad |
| Manufacturer | Pactrade Marine #ad |
| Height | 2 Inches |
| Length | 18 Inches |
| Width | 2 Inches |
| Part Number | PM616125 |
| Model | PM616125 |
More information #ad
9. Bullnose Products
#adSmall Aluminum boat, Jon boat, inflatable Pontoon, Bullnose Rudder clamp on boat rudder fits most 24-55 thrust trolling motors: Commonly used for, Canoe, fishing Kayak, etc., Pelican Bass Raider 10E
#adCustomers have also said, “it prevents the boat from spinning as much when the motor is off”. The bow mount motor must be a hand cable pull, MAXXUM, a hand cable pull will allow you to carefully bring the motor up out of the water on the motor mount.
More information #ad
Simply add a bullnose rudder which is designed to give you better control of your watercraft in most windy conditions, and prevent the boat from spinning as much when the motor is off. Essential - in most cases it helps hold a true course at both a slow and high trolling speeds. Common tiny boats used are, jon boats, newport vessel trolling motor, canoes, fishing kayak, motorguide trolling motors, Pelican Bass Raider 10E, inflatable pontoon, and more. It's most commonly used for "but not limited to" minn kota trolling motor, etc. However, edge, and FORTREX. Bow mount - fits the minn kota, not self deploy. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all.
| Brand | Bullnose Products #ad |
| Manufacturer | Bullnose Products LLC #ad |
| Height | 1.5 Inches |
| Length | 10.5 Inches |
| Weight | 0.54 Pounds |
| Width | 6.75 Inches |
| Part Number | 868527000206A |
More information #ad
10. Minn Kota
#adMinn Kota Endura C2 30 Freshwater Transom Mounted Trolling Motor 30" Shaft
#adIt's a minn kota exclusive, and we guarantee it for life. Lever lock bracket: this solid 10-position bracket features a quick-release lever lock and reinforced composite material that resists flexing, warping, and UV damage.
More information #ad
5 fwd/3 rev speed settings: Five speed settings for forward and three speed settings for reverse. Indestructible composite shaft — guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft.| Brand | Minn Kota #ad |
| Manufacturer | Johnson Outdoors #ad |
| Height | 16.25 Inches |
| Length | 42.38 Inches |
| Weight | 15 Pounds |
| Width | 5.38 Inches |
| Part Number | 1352230 |
| Model | 3005.6987 |
| Warranty | 2 year manufacturer |
More information #ad
