As an Amazon Associate I earn from qualifying purchases.









Heat resistant acetal resin housing. Advanced features throughout supported with an exclusive 5 year warranty. Rule manufactured long life, heavy duty motor for superior quality. Exclusive Rule moisture tight seals. Rule manufactured long life, heavy duty motor for superior quality.
1. Rule
#ad
Rule 10, Non-Automatic, 2000 GPH, Bilge Pump, 12 Volt
#adRule #ad - A genuine rule product, don't settle for anything less. More pumping capacity and more exclusive design features than any comparable competitive pump at a lower cost. Compact, long-life motors, efficient, able to run dry for short periods.More information #ad
6 millimeter hose barb discharge outlet. Silent and vibrationless operation, completely submersible, stainless steel shaft, rust and corrosion resistant.3 year Warranty. 1-1/8 inch 28.Brand | Rule #ad |
Manufacturer | Rule #ad |
Height | 4.5 Inches |
Length | 5.25 Inches |
Weight | 1.41 Pounds |
Width | 6 Inches |
Part Number | 10 |
Model | 10 |
More information #ad
2. Rule
#ad
1500 GPH, Bilge Pump, Non-Automatic, Rule 02, 12 Volt
#adRule #ad - Material Type: Canvas. Included components: rule 02 higher capacity Bilge Pump - 1500 Gph, 5678 Lph, 12V. Sport type: Boating.More information #ad
Brand | Rule #ad |
Manufacturer | Rule #ad |
Height | 4.5 Inches |
Length | 5.25 Inches |
Weight | 3.1 Pounds |
Width | 6 Inches |
Part Number | 02 |
Model | 02 |
More information #ad
3. Rule
#ad
Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500
#adRule #ad - High efficiency, low amp motor. Submersible and ignition protected. Includes backflow preventer. Stainless-steel shaft. Completely automatic with manual override; no float switch needed.More information #ad
Brand | Rule #ad |
Manufacturer | Flow Control, LLC #ad |
Height | 3 Inches |
Length | 7 Inches |
Weight | 0.8 Pounds |
Width | 7 Inches |
Part Number | 25SA |
Model | 25SA |
More information #ad
4. Rule
#ad
12 Volt , White/Red, Non-Automatic, Rule 14A 3700 GPH Heavy Duty Bilge Pump
#adRule #ad - A genuine rule product, don't settle for less. Known for trouble free operation and reliability. Heavy duty construction for both commercial and pleasure boat use. 1-1/2" 38mm discharge outlet.More information #ad
Brand | Rule #ad |
Manufacturer | XYLEM FLOW CONTROL LLC #ad |
Height | 7 Inches |
Length | 11 Inches |
Weight | 2.2 Pounds |
Width | 8 Inches |
Part Number | 14A |
Model | 14A |
Warranty | 3 years |
More information #ad
5. Rule
#ad
Rule 500 GPH 25DA Standard Bilge Pump-500
#adRule #ad - Submersible and ignition protected. Includes backflow preventer. Highly efficient, low amp motor. Stainless-steel shaft. Non-automatic, used with a panel switch or Rule float switch.More information #ad
Brand | Rule #ad |
Manufacturer | Rule #ad |
Height | 4 Inches |
Length | 7 Inches |
Weight | 0.9 Pounds |
Width | 6.9 Inches |
Part Number | 25DA |
Model | 25DA |
Warranty | Manufacturer Warranty |
More information #ad
6. Rule
#ad
Rule Mate 500 Fully Automated Bilge Pump, 12V RM500B
#adRule #ad - Refer to manufacturer recommendations and guidelines to ensure a proper fit. Bilge pump 500 . Quick and easy installation. Power rating: 12V.More information #ad
Brand | Rule #ad |
Manufacturer | Rule #ad |
Height | 3.5 Inches |
Length | 6.75 Inches |
Width | 8.5 Inches |
Part Number | RM500B |
Model | RM500B |
Warranty | Manufacturer warranty |
More information #ad
7. Rule
#ad
White, Moisture Tight Seals, 12, 24 or 32 Volt , Rule 37A SuperSwitch Bilge Float Switch
#adRule #ad - Removable base for easy cleaning and servicing. Rule-a-matic float Switch 37A. Mercury-free snap switch tested to over one million cycles and marine-grade blocked wire. Designed for pumps drawing up to 14 amps at 12 volt DC.More information #ad
Brand | Rule #ad |
Manufacturer | Rule #ad |
Height | 8.25 Inches |
Length | 3 Inches |
Weight | 0.33 Pounds |
Width | 6 Inches |
Part Number | 37A |
Model | 37A |
Warranty | 5 years |
More information #ad
8. Rule
#ad
Rule 51S Marine Rule 1500 Automatic Bilge Pump 12-Volt,White/Red
#adRule #ad - A genuine rule pump, 3 year warranty. Electronic sensing series bilge pumps. If water is present, the pump will sense resistance and will continue to run until all water is removed.More information #ad
Turns the pump impeller every 2-1/2 minutes for approximately one second. A compact way of constantly sensing for water presence.Brand | Rule #ad |
Manufacturer | Rule #ad |
Height | 7 Inches |
Length | 12 Inches |
Weight | 3.5 Pounds |
Width | 8 Inches |
Part Number | 51S |
Model | 51S |
More information #ad
9. Rule
#ad
12 Volt, 360 GPH, Rule 24 Submersible Bilge Pump
#adRule #ad - A geniune rule product, don't settle for less. 3/4 inch discharge outlet. Economically priced and designed for small boats. Outstanding quality and value. 3 year warrant.More information #ad
Brand | Rule #ad |
Manufacturer | Rule #ad |
Height | 2 Inches |
Length | 7 Inches |
Weight | 0.7 Pounds |
Width | 5.5 Inches |
Part Number | 24 |
Model | 24 |
More information #ad
10. Rule
#ad
2000 GPH Gold Series Bilge Pump, Rule 09
#adRule #ad - 1-1/8 inch 28. 6mm Discharge outlet. Pump and switch are stand-alone products, efficient, compact, long-life motors. Exclusive Rule moisture tight seals.Heat resistant acetal resin housing. Advanced features throughout supported with an exclusive 5 year warranty. Rule manufactured long life, heavy duty motor for superior quality. Exclusive Rule moisture tight seals. Rule manufactured long life, heavy duty motor for superior quality.
More information #ad
High pumping capacity and reliability at a lower cost, ability to run dry for short periods. A double insulated long stack motor. Easy-clean, snap-lock strainer bases. Rust and corrosion protection, silent and vibration less operation. Heat resistant acetal resin housing. A double insulated long stack motor.Brand | Rule #ad |
Manufacturer | Acr Electronics #ad |
Height | 5.75 Inches |
Length | 13 Inches |
Weight | 3.3 Pounds |
Width | 13.75 Inches |
Part Number | 09 |
Model | 09 |
Warranty | 1 Year Manufacturer |
More information #ad