Top 10 RMsc Optic for Hellcat – Hunting Equipment

As an Amazon Associate I earn from qualifying purchases.

1. Ade Advanced Optics

#ad

Sig Sauer P365XL/P365X,Ruger Max-9,Glock 43 MOS,Springfield HellcatOSP/PRO, Ade Advanced Optics Spike Red Dot Sight for RMS/RMSC Footprint Optics Ready Pistol Such as Canik TP9 Elite SC, Mete SFT

#ad
Ade Advanced Optics #ad - For the rear of part of the red dot to become a back up iron sight. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.

Ade spike created an iron sight curve at the end of the body, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a co-witness back up sight, and also added two white dots on the curve. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. Ade spike red dot sight is always powered on with automatic brightness. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.

Hard coated aircraft aluminum and multi-coated glass. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. Operates with a single CR2032 3v battery. With the ultra short design, in addition to the LED dot and pistol equipped iron sight. 4moa, weight approximately 17. 6 grames062oz, Length1.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberSPIKE-hellat

2. Rain 6

#ad

Shield Sights RMSc Red Dot Sight | GEN II | 4 MOA | Made in The UK | RMSc Reflex Mini-Sight Premium Optic

#ad
Rain 6 #ad - Battery: 3 yrs. Lens: glass & Parallax Free 1X. Color: hard Anodized Black. Dot: led 4 moA. Durable: Aircraft Aluminum. Model: gen ii 2020+.

Profile: ultra low, Co-Witness w/ Stock Sights. Armor: upgradeable w/ Armor Hood. Fitment: glock g43xmos glock g48mos sig sauer 365xl sig sauer p322 springfield armory hellcat osp &p9 m2. 0 smith & wesson m& hellcat pro osp walther pps m2 walther q4/q5 match canik tp9 sc elite canik rival sfx bul sas2 viper ruger max-9 smith & wesson performance center m&p9 shield plus – Optics Ready MOSSBERG MC2 sc MOSSBERG 940 Rifle. Origin: made in UK. Life approximately CR2032.
BrandRain 6 #ad
ManufacturerShield Sights #ad
Height1.02 Inches
Length1.57 Inches
Width0.79 Inches
ModelRMSc
Warranty1 Year

3. Ade Advanced Optics

#ad

Sig Saure Romeo Zero, Jp Red Dots Installed., Kydex IWB Pistol Red Dot Optics Ready Holster for Springfield Hellcat OSP Pistol with Optic Cut- Compatible with Shield RMS/RMSC.RMSW/SMS

#ad
Ade Advanced Optics #ad - Fully covers trigger and backside of gun, providing safety and protection from sweat. Thick. 08 kydex material that is strong, durable, and molded specifically for your weapon. This iwb optics ready holster is compatible with red dots such as shield rms/rmsc/rmsw/sms, Swampfox Sentinel, leupold delta Point Pro, JP Enterprises JPoint, ADE RD3-018 SPIKE, Sig Saure Romeo Zero, Vector Optics Frenzy-S Red Dots installed.

Audible click and secure retentION Audible click sound ensures your firearm is safe and secure every time you reholster. Designed for springfield hellcat osp with optic Cut space for keeping the red dot installed for every day carry.

Package includes holster plus hex adjustment tool. Adjustable Retention so you can get the perfect fit. Fits 1. 5" width Belt. No risk of pressing release. Adjustable cant from -5 to 20 degrees this slight adjustment from -5 to 20 degrees will help angle your holster perfectly for ApprndixAIWB, Strong Side, Behind The Hip or Cross Draw. Also fit non-osPNon-Optics Ready Hellcat.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberHellcatHolster

4. DPP Titanium

#ad

GL-H07KA, DPP Titanium Adapter Plate for Glock 43X/48 MOS Hellcat OSP Holosun 407k/507k

#ad
DPP Titanium #ad - 058″ thick, ultra low Profile and lightweight, Easy to install. For glock 43x/48 mos hellcat osp/pro with the rmsc optic cut to mount a Holosun 407K/507K, No need to modify the slide. Precision cnc machined from 7075-T6 aerospace grade Aluminum with Black anodized finish, mounting hardware included. 100% money-back warranty within 30 days of purchase * no questions asked. 7x24 quick response technical support. Lifetime warranty. Fully support recoil posts design, durable, reliable.
BrandDPP Titanium #ad
ManufacturerDPP Titanium #ad
Part NumberGL-H07KA

5. Ade Advanced Optics

#ad

Ade Advanced Optics RD3-018-SC Spike Micro Red Dot Sight for Springfield Hellcat OSP/PRO, P365XL Spectre Comp and Canik TP9 Elite SC

#ad
Ade Advanced Optics #ad - With the ultra short design, to give enough distance to be a Co-Witness back up sight, the red dot provides a distance/gap on some full size optics ready pistols, in addition to the LED dot and pistol equipped iron sight. Comes with 3 pairs of screws for sig p365xl/x, springfield hellcat osp and canik tp9 elite sc only.

Ade does not know the screw spec every pistol manufacture used for their screw hole. Hard coated aircraft aluminum and multi-coated glass. Comes with screws for several optics Ready handguns. Designed to fit canik elite tp9 sc, canik mete sft, glock 43x mos/48 mosnot compatible with regular glock 43x/48 that are not mos, canik mete sfx, s&W MP9 EZ, walther pps m2 optics ready, sig p365x/p365xl/p365xl spectre comp, ruger max-9, S&W Shield 2.00 optics ready, springfield hellcat osp, s&w m&p shield plus performance center, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint. Ade spike red dot sight is always powered on with automatic brightness.

Operates with a single CR2032 3v battery. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. The provided screws might NOT work with EVERY compatible pistol listed. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberSPIKE-SC

6. Swampfox

#ad

Swampfox Sentinel Micro Reflex RED DOT RMsc Pistol Cut Shake n Wake 3 MOA dot – Manual Brightness

#ad
Swampfox #ad - Automatic, the choice is yours! sentinel-m manual features ten manually adjusted brightness settings accessed via digital push buttons. There are no manual controls at all, no Shake ‘N Wake– no way for Sentinel-A to be accidentally shut off, ever. Shoehorned into this tiny scope is a 16mm x 16mm window, big enough for fast acquisition and sight tracking, an inch wide, small enough that it doesn’t affect concealment at all.

But what does it fit? sentinel is really small. Sentinel-a automatic truly never sleeps. About an inch tall, and 1. 6 inches long. A photosensitive sensor on the left side of the body provides dot brightness relative to ambient light conditions. Shake ‘n wake motion sensing preserves battery life when Sentinel-M has been still for about 4 minutes.

Duty grade? darn right! other companies are producing slimline pistol dots with plastic bodies and clear polymer lenses. Bet your *ss dependable! a concealed carry optic must be ultra dependable, because you are literally betting your life that it will be ready when called upon. Manual vs. Sentinel is “dunk it” waterproof when installed using the included flexible seal that fits between the optic and footprint. With new motion, Sentinel-M resumes its previous brightness level.
BrandSwampfox #ad
ManufacturerSwampfox #ad
Weight0.06 Pounds

7. Ade Advanced Optics

#ad

Ade Advanced Optics NUWA RD3-021 Micro Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Ruger Max9 and Springfield Hellcat OSP/PRO, Sig Sauer 365XL

#ad
Ade Advanced Optics #ad - Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. Ade nuwa is the firstand the onlyred dot with rms/rmsc footprint that has top battery loading system, no need to remove the sight to change the Battery that requires re-sight in and waste ammo.

Press and hold switch for 2 seconds to turn on/off, quick press to adjust the brightness from low to high. The provided screws might NOT work with EVERY compatible pistol listed. Ade nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. Designed to fit canik elite tp9 sc, s&p shield plus performance center, ruger max-9, canik mete sft, s&w m&w shield 2.0

0 optics ready, springfield hellcat osp, s&w mp9 ez, walther pps m2 optics ready, glock 43x mos/48 mosnot compatible with regular glock 43x/48 that are not MOS, Canik METE SFX, Sig P365X/P365XL/P365XL SPECTRE COMP, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.2moa red Dot. Hard coated aircraft aluminum and multi-coated glass. Ade makes the red dot to accept the industrial standard footprint. Weight approximately 15. 5 grames0
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-021 NUWA

8. Ade Advanced Optics

#ad

ADE Spike Micro Green Dot Sight for RMS/RMSC Footprint Optics Ready Pistol Such as Canik TP9 Elite SC, Sig Sauer P365XL/P365X,Ruger Max-9,Glock 43MOS/48 MOS, Mete SFT, Springfield Hellcat OSP/PRO

#ad
Ade Advanced Optics #ad - The spike now available in 3 models. The brightness will turn high and low accordingly to the environment brightness. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. Comes with screws for several optics Ready handguns.

Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. Ade makes the red dot to accept the industrial standard footprint. Ade spike red dot sight is always powered on with automatic brightness. 4moa, weight approximately 17. 6 grames062oz, Length1. 6" x Width. 92" x Height. 93". For the rear of part of the red dot to become a back up iron sight. Not plastic body with polymer lens. Designed to fit canik elite tp9 sc, canik mete sft, sig p365xl/p365x, s&w m&w mp9 ez, canik mete sfx, ruger Max-9, glock 43x mos/48 mosnot compatible with regular glock 43x/48 that are not mos, springfield hellcat osp, walther pps m2 optics ready, S&W Shield 2.0

0 optics ready, s&p shield plus performance center, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-018G-METE
ModelRD3-018G-METE

9. Ade Advanced Optics

#ad

Ade NUWA 2MOA Micro Red Dot for RMS/RMSC Footprint Optics Ready Pistol Such as Canik TP9 Elite SC, Sig Sauer P365XL/P365X,Ruger Max-9,Glock 43 MOS, Springfield Hellcat OSP/PRO, Mete SFT

#ad
Ade Advanced Optics #ad - Comes with screws for several optics Ready handguns. Weight approximately 15. 5 grames055oz, Length1. 5" x Width. 88" x Height. 89". The provided screws might NOT work with EVERY compatible pistol listed. Designed to fit canik elite tp9 sc, ruger max-9, springfield hellcat osp, walther pps m2 optics ready, s&w mp9 ez, s&w m&p shield plus performance center, tp9 sft, sig p365xl/p365x, mossberg mc2sc, s&w shield 2.

0 optics ready, glock 43x mos/48 mosnot compatible with regular glock 43x/48 that are not mos, Canik METE SFT, TP9 SC, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint. Ade nuwa is the firstand the onlyred dot with rms/rmsc footprint that has top battery lOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo.

Ade does not know the screw spec every pistol manufacture used for their screw hole. For the rear of part of the red dot to become a back up iron sight. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness. Ade makes the red dot to accept the industrial standard footprint. 2moa red dot. Hard coated aircraft aluminum and multi-coated glass.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-021-2

10. Ade Advanced Optics

#ad

Sig Sauer 365XL, Ade Advanced Optics Spike RD3-018 Micro Red Dot Sight for Canik TP9 Elite SC, Ruger Max9 and Springfield Hellcat OSP/PRO, Canik Mete SFT

#ad
Ade Advanced Optics #ad - Ade spike red dot sight is always powered on with automatic brightness. Not plastic body with polymer lens. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. Comes with screws for several optics Ready handguns. Ade makes the red dot to accept the industrial standard footprint.

Hard coated aircraft aluminum and multi-coated glass. For the rear of part of the red dot to become a back up iron sight. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness. Ade does not know the screw spec every pistol manufacture used for their screw hole. Designed to fit canik elite tp9 sc, s&w mp9 ez, s&w m&w shield 2.0

0 optics ready, ruger max-9, walther pps m2 optics ready, canik mete sft, sig p365x/p365xl/p365xl spectre comp, glock 43x mos/48 mosnot compatible with regular glock 43x/48 that are not MOS, S&P shield plus performance center, Canik METE SFX, springfield hellcat osp, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take. 4moa, weight approximately 17. 6 grames0
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberSPIKE (RD3-018)