As an Amazon Associate I earn from qualifying purchases.
It may cause slight chromatic aberration. Brake disc : od-7. 4in/18. 8cm, id-2''/5. 1cm;. Scooter parts, powersport parts, 110cc, 250cc, 50cc, 125cc, motorycycle partsrear, go kart parts, 70cc, brake assembly;.


Quality material: the master cylinder of this go-kart brake kit is made of high-performance aluminum, preloaded with DOT3 brake fluid. Do not worry about bleeding the brakes. Key parameters: bolt spacing of master cylinder brake pedal: 0787" / 20 mm; master cylinder mounting Hole: 2.
Complete accessories: the go-kart hydraulic brake assembly includes a master cylinder, three brake calipers, three brake hoses, and brand-new brake discs. Drilled & slotted rotors improve heat dissipation during extreme conditions. Three rubber brake hoses: 34" / 1090 mm, 75" / 860 mm, 43" / 1900 mm. The brake discs are constructed from high-quality steel, durable and lasting for daily use.



Packing list: 1 x brake caliper, 1 x brake disc, 2 x spare brake Pads, 2 x Screws, 1 x brake bracket, 2 x Nuts, 1 x wrench, please check if your brake calipers are the same as the picture before ordering.
Fitment: compatibility with manco 9598 9597, yerf-dog, asw, Thunder karts, Carter, american sportworks, Ken-bar, Bristers, Airheart MB-1 Go Kart use rotor disc brake. Product size: brake caliper bottom length 8. 5cm/3. 3in, width 4. 3cm/1. 7in, bolt hole circle 18. 2mm/071in, mounting hole distance center to center, brake caliper height 6. 5cm/2.

Brake drum size—diameter of mounting hole--031"8mm, outside diameter--4. 2"107mm, diameter of mounting hole--039"10mm, inside diameter--2"51mm. Product feature and easy to install—this brake band does not attach directly to the axle, so it would theoretically fit any size live axle.
There is a hole on either end of the brake band. One end fastens to a stud mounted on the cart, but is still able to pivot, and the other end fastens to your brake rod. Fitment—fit for predator 212cc gx160 gx200 196cc 6. 5hp 420cc go kart yard cart dune buggies mini bike atv. Compatibility:fit for manco bandit / b1sb486, rotary 484, azusa 2251 / 1492 / Critter / 297 / 4316 / 2251-B.



Premium quality100% brand new, durable, complete brake assembly, high quality, perfect for DIY kart enthusiasts. Fits for the referencesuitable for Hammer Head and Trailmaster Go Karts as well as other Chinese 150cc Go Kart.
1. Yaegarden
#ad
Yaegarden Rear Brake System Brake Disc Motor Disk Kit Set Dirt Pit Trail Atv Quads Buggies 125CC Parts
#adYaegarden #ad - You can get the most friendly customer service, 90 days free return or refund. Note : due to factors such as display, shooting, etc.It may cause slight chromatic aberration. Brake disc : od-7. 4in/18. 8cm, id-2''/5. 1cm;. Scooter parts, powersport parts, 110cc, 250cc, 50cc, 125cc, motorycycle partsrear, go kart parts, 70cc, brake assembly;.
More information #ad
Note : due to the batch, the color of each batch may vary slightly, please feel free to contact us if you encounter any problems during use, really appreciate for your kind understanding. One set of rear brake system+brake disk fits for most of dirt bike in the markets;. Please understand;.Brand | Yaegarden #ad |
Manufacturer | YAEMART CORPORATION #ad |
Part Number | RA-0156 |
More information #ad
2. CPVNQMDG
#ad
CPVNQMDG Rear 4" Drum Brake Band Pin with 65" Cable for Go Kart 1" Bore & 1/4" Keyway for Mini Bike 212cc 196cc 6.5hp Dune Buggies Drift Trike Heavy Duty Go Kart Cart with Hardware Kit
#adCPVNQMDG #ad - Compatibility:fit for Manco 1492 Azusa 2562. Package include:1 x brake drum, 1 x sprocket hub, 1 x brake band, 1 x brake pin, 1 x brake cable, 4 x Screw, 4 x nut. Fitment:fit for predator 212cc gx160 gx200 196cc 6.More information #ad
5hp dune buggies drift trike Heavy Duty Go Kart Cart ATV Parts. Model: 4" brake band ;60" housing / 65" cable;4 inch braKE DRUM;1" Bore & 1/4" Keyway. The sprocket brake bub is made of high quality 45# steel material. Nicely balanced, stronger and more durable to use. ".Brand | CPVNQMDG #ad |
Manufacturer | Nan Mei #ad |
Part Number | AMZZ-BD10695 |
Model | 1 |
Warranty | 3 months |
More information #ad
3. VEVOR
#ad
150cc Go Kart Hydraulic Brake Kit, Universal Go Karts Brake Kit, VEVOR GO-KART Brake Master Cylinder Kit, Kandi Complete Including Master Cylinder Hose Caliper Pad for 150cc
#adVEVOR #ad - High adaptability: this go-kart hydraulic brake kit is compatible with Hammerhead and Trailmaster karts and other 150cc go-karts. It provides superior performance demanded by off-road enthusiasts. It comes ready to install, pressurized with brake fluid.Quality material: the master cylinder of this go-kart brake kit is made of high-performance aluminum, preloaded with DOT3 brake fluid. Do not worry about bleeding the brakes. Key parameters: bolt spacing of master cylinder brake pedal: 0787" / 20 mm; master cylinder mounting Hole: 2.
More information #ad
36" / 60 mm center to center. Promised braking & cooling: this hydraulic brake kit features heavy-duty stopping power for everyday drivability. Complete accessories: the go-kart hydraulic brake assembly includes a master cylinder, three brake calipers, three brake hoses, and brand-new brake discs. Drilled & slotted rotors improve heat dissipation during extreme conditions. Three rubber brake hoses: 34" / 1090 mm, 75" / 860 mm, 43" / 1900 mm. The brake discs are constructed from high-quality steel, durable and lasting for daily use.
Brand | VEVOR #ad |
Manufacturer | VEVOR #ad |
Height | 8 Inches |
Length | 10 Inches |
Weight | 11.4 Pounds |
Width | 8 Inches |
Part Number | Go-kart Hydraulic Brake Kit |
Model | GO-KART Brake Master Cylinder Kit |
More information #ad
4. GUCIDDAK
#ad
GUCIDDAK 4" Band Brake & 4" Brake Drum & Pin Kit for Go Kart Yard Cart Mini Bike ATV
#adGUCIDDAK #ad - Model: 4" brake band, 4 inch BRAKE DRUM. Package include:1* brake Drum+1*Brake Band+1*Brake Pin. Fitment:for go kart cart Car Mini Bike replaces Yerf-Dog Manco Rotary.More information #ad
4" od machined drum for brake band use;2" id of center Hole;2 Bolt Hole Patterns: 5/16" & 3/8". Replacement for original part. Please check part comparibility to see if it fits your model.Brand | GUCIDDAK #ad |
Manufacturer | LIANGXUEKEER #ad |
Part Number | AMBL-BD10597 |
More information #ad
5. YOXUFA
#ad
YOXUFA 4.5" Brake Band with Pin Kit 4-1/2" Go Kart Drum Brake Band for Predator Yerf Dog Go Cart ATV Mini Bike Four Wheeler Quad UTV Black Parts
#adYOXUFA #ad - Our 4. 5" 4-1/2" go-kart band brake is a top-quality aftermarket item that replaces the Manco 1036 band brake. Go kart drum brake band for a wide range of go-karts and mini bikes, like Tecumseh* and Briggs & Stratton Duroma* Predator Engines go kart.More information #ad
This size band may work on a number of drum sizes from 3-7/8" through 4-5/8" and has good stopping power. Please check size and pictures carefully to make sure it fit for your go kart. Package list: 1 * 4. 5"brake band, 1* Brake Pin.Brand | YOXUFA #ad |
Manufacturer | YOXUFA #ad |
Part Number | BB02-KDC |
Model | BB02-KDC |
Warranty | NO |
More information #ad
6. Wadoy
#ad
Go Kart Brake Kit Mechanical Disc Bracket Caliper for Mancoo 9598 9597 Yerf-Dogg ASWW Predator 196cc 212cc 6.5hp GX160 Mechanical Brake Kit
#adWadoy #ad - Non original aftermarket part. Efficient braking function: mechanical brake caliper can withstand a maximum rotor thickness of 0250" and can be adjusted to fit smaller sizes, the compact design enables efficient braking effect, a perfect replacement.Packing list: 1 x brake caliper, 1 x brake disc, 2 x spare brake Pads, 2 x Screws, 1 x brake bracket, 2 x Nuts, 1 x wrench, please check if your brake calipers are the same as the picture before ordering.
More information #ad
Our company attaches great importance to the shopping experience of each customer. About us:the replacement part is made from durable high quality material and well-tested by manufacturer. Fitment: compatibility with manco 9598 9597, yerf-dog, asw, Thunder karts, Carter, american sportworks, Ken-bar, Bristers, Airheart MB-1 Go Kart use rotor disc brake. Product size: brake caliper bottom length 8. 5cm/3. 3in, width 4. 3cm/1. 7in, bolt hole circle 18. 2mm/071in, mounting hole distance center to center, brake caliper height 6. 5cm/2.
Brand | Wadoy #ad |
Manufacturer | Wadoy #ad |
Part Number | 212cc |
Model | 212cc |
Warranty | 3 months warranty |
More information #ad
7. GREHUA
#ad
GREHUA Rear 4" Drum Brake Band Pin Brake Cable Kit for Manco Bandit Critter 1492 4316 297 Rotary 484 Azusa 2251-B Yerf-Dog Predator 212cc 420cc 196cc Go Kart Yard Cart Dune Buggies Mini Bike ATV
#adGREHUA #ad - Brake band size—wide--099"25mm, thickness--024"6mm, outside diameter--4. 84"123mm, inside diameter--4. 37"111mm. Package included—1 x brake drum, 1 x brake pinscrew is included, 1 x brake cable, 1 x brake band, 1 x wrench.Brake drum size—diameter of mounting hole--031"8mm, outside diameter--4. 2"107mm, diameter of mounting hole--039"10mm, inside diameter--2"51mm. Product feature and easy to install—this brake band does not attach directly to the axle, so it would theoretically fit any size live axle.
More information #ad
The brake drum has universal mounting hole pattern with both 5/16" & 3/8" bolt holes -- those 8 bolt holes will hopefully match those on you wheel brake hub. There is a hole on either end of the brake band. One end fastens to a stud mounted on the cart, but is still able to pivot, and the other end fastens to your brake rod. Fitment—fit for predator 212cc gx160 gx200 196cc 6. 5hp 420cc go kart yard cart dune buggies mini bike atv. Compatibility:fit for manco bandit / b1sb486, rotary 484, azusa 2251 / 1492 / Critter / 297 / 4316 / 2251-B.
Brand | GREHUA #ad |
Manufacturer | GREHUA #ad |
Height | 3.94 Inches |
Length | 1.97 Inches |
Width | 5.91 Inches |
Part Number | BC-BD-01 |
Model | BC-BD-01 |
More information #ad
8. QASKEHKT
#ad
Go Kart Mini Bike Parts Brake Caliper Rebuild Kit for 9597 Manco
#adQASKEHKT #ad - Manco go kart brake caliper Rebuild Kit For 9597 Caliper. Rebuild kit for disc brake caliper kit Includes 2*Friction Pads 1* Load Shoe 1*Adjusting Nut 1* Plunger.More information #ad
Brand | QASKEHKT #ad |
Manufacturer | QZmotorsu #ad |
Part Number | AMZQMK0094 |
More information #ad
9. Futchoy
#ad
Futchoy Rear Hydraulic Brake Caliper Assembly with Disc Rotor Kit Go Kart Hydraulic Brake Kit for ATV Go-Kart 50-125CC 4 Wheeler
#adFutchoy #ad - Highqualitymade of high-quality materials, strong and durable, long service life. Package includes1x rear Brake Caliper Assembly, 1x Rear Brake Disc. Such as taotao, buyang, coolsport, Sunl, Kazuma, ROKETA, AIM-EX etc.More information #ad
Scope of applicationfits for: most chinese made 50-125cc go-kart aTVs 4 Wheeler. Product detailshose length: 1550mm, diameter of disc: 158mm, diameter of Centre Hole: 48mm, mounting Hole Diameter: 8mm, thickness of disc: 3mm, Mounting Hole Spacing: 68mm Diagonal.Brand | Futchoy #ad |
Manufacturer | Royan-LMJ #ad |
Weight | 3.97 Pounds |
Part Number | AC-YCZYQ-3570-FJD |
Model | AC-YCZYQ-3570-FJD |
More information #ad
10. Futchoy
#ad
Futchoy Go Kart Brake Master Cylinder Hydraulic Brake Kit Hydraulic Brake Master Cylinder Kit Suitable for Hammer Head and Trail-Master Go Karts Other Chinese 150cc Go Kart
#adFutchoy #ad - Please allow 05-1 inch difference due to manual measurement. 1inch=2. 54cm. Package includes1 x hydraulic brake Kit for Go Karts Master Cylinder, Hose, Caliper & Pad.Premium quality100% brand new, durable, complete brake assembly, high quality, perfect for DIY kart enthusiasts. Fits for the referencesuitable for Hammer Head and Trailmaster Go Karts as well as other Chinese 150cc Go Kart.
More information #ad
Go kart brake master cylindermaterial: metal, master cylinder brake pedal bolts spacing: 0787"/20mm, master cylinder mounting hole: 2. 36"/60mm center to center, hydraulic cable lengthfront right: 43"/1090mm, Hydraulic cable lengthfront left: 34"/860mm, Hydraulic cable lengthrear: 75"/1900mm. Reminderplease make sure that the size of this is in line with your needs, thank you.Brand | Futchoy #ad |
Manufacturer | Royan-LMJ #ad |
Weight | 10.8 Pounds |
Part Number | AC-YCZYQ-5118-FJD |
Model | AC-YCZYQ-5118-FJD |
More information #ad