Top 10 Doctor Red Dot – Gun Sights

As an Amazon Associate I earn from qualifying purchases.

1. Vortex

#ad

Vortex Optics Venom Red Dot Sight, 3 MOA Dot

#ad
Vortex #ad - Power and dot intensity controls are conveniently located on the left side of the sight to choose between 10 brightness levels. 1 moa wind age and elevation adjustments are super sleek and make sighting in a breeze.

The venom also has an auto-brightness mode that uses an ambient light sensor to control dot intensity if the shooter prefers. High quality, fully multi-coated lenses offer a clean, wide field of view. The venom's aluminum housing ensures this unit will stand up to whatever you throw at it. The venom red dot sight-3 moa promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast.

Parallax Free. The top load system makes changing the CR1632 battery a breeze, as you will not have to remove your sight to change the power source. The venom red dot will fit well on your rifle or shotgun giving you optimal flexibility. O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.
BrandVortex #ad
ManufacturerVortex Optics #ad
Height2.9 Inches
Length6.7 Inches
Weight0.45 Pounds
Width5.1 Inches
Part NumberVMD-3103
ModelVMD-3103
WarrantyManufacture Warranty

2. Ade Advanced Optics

#ad

Ade Advanced Optics 2021 Edition rd3-006b-1 Green Dot Micro Mini Reflex Sight for Handgun …

#ad
Ade Advanced Optics #ad - It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. What you see is a small reflex of led light bulb on the lens. Full metal construction and glass.

Newly updated front switch designed in Oregon. The change of new 2021 model compare to other rd3-006 is the front switch is smaller, that it allows to sit in certain 3rd party machine shop made Optic Cut of custom mill slide. Ade model rd3-006, rd3-013, eotech mrds. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. This green dot comes with a picatinny mounting base. Answer: it is very likely 99% chance you have astigmatism that you are not aware. It does not fit any other screw pattern such as shield rms/rmcs, meopta, rd3-009, insight, rd3-015 are designed to fit the slide/footprint of plate made for Vortex Venom, Burris Fastfire, RD3-012, Trijicon rmr, Docter, C-More type footprint plate/cut/screw pattern.3

3 moa. One simple and quick way to find out is to use your cellphone to take a photo of the dot. If you see a circle dot in the photo you took, multi dot, half-moon shape, you basically diagnosed you have AstigmatismBecause cellphone is a machine does not has human astigmatism.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-006B1

3. Ade Advanced Optics

#ad

Ade Advanced Optics RD3-006B Green Dot Micro Mini Reflex Sight For Handgun

#ad
Ade Advanced Optics #ad - Multi Illumination Settings. We have made several improvements since it's initial release in 2016. 3 moa. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.

Ade model rd3-006, rd3-012, insight, rd3-015 are designed to fit the slide/footprint of plate made for vortex Venom, Docter, Meopta, RD3-013, Burris Fastfire, RD3-009, Eotech MRDS. It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief.

We have made it more durable to withstand recoil and improved the ability to hold zero. Powered by a lithium CR2032 batteryIncluded. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. This green dot comes with a picatinny mounting base. Any plate made for those brands also fits this sight. Designed in Oregon.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-006B
ModelRD3-006B

4. Ade Advanced Optics

#ad

Burris Fastfire, Vortex Venom/Viper Red Dot Sights, Ade Advanced Optics Absolute Cowitness Riser HIGH Mount, Compatible with Doctor

#ad
Ade Advanced Optics #ad - Comes with installation screws and allen wrench. For using on ade rd3-006 haracan, rd3-012 delta, rd3-009 crusader, rd3-013 bertrillium, RD3-015 Zantitium Red Dot Sight. This is an riser optic mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level. Compatible with doctor, eotech mrds, burris Fastfire, insight, vortex venom/Viper, Meopta, Sightmark Mini Shot Red Dot Sights. Finished in a matte Black Anodize. Precision cnc machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberHM1

5. ZOEKIM

#ad

ZOEKIM Glock Sight Mount Plate, Glock 17 19 22 23 26 27 34 35 37 41 Mounting Plate for Mini Red Dot Sight, Glock Sight Mount Plate Base for Red dot Burris Sightmark Vortex

#ad
ZOEKIM #ad - Durable glock mounting Block - attaches firmly to your firearm for sure performance in tactical situations. Note: not fit for rmr, RMS, DOCTOR.

Glock red dot base plate fits for glock 17 19 22 23 26 27 34 35 37 41. Replace the rear sight slot with mini red dot base plate. Fits burris fastfire micro red dot sightNotes: the screws included in the package are not long enough for some Burris red dot sights, you can use the screws in the red dot. This glock red dot mount fits ade advanced optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight Fits Vortex Viper/Venom micro red dot sight.
BrandZOEKIM #ad
ManufacturerZOEKIM #ad
Part NumberZK-Plate-Glock-Black

6. Ade Advanced Optics

#ad

Ade Advanced Optics Stingray UMRD Micro Red Dot Sight for RMR Footprint/Mounting Plate/Slide/Plate Optics Ready Pistol, 6MOA

#ad
Ade Advanced Optics #ad - Weight approximately. 88oz/25grams. 6 moa dot. Ade stingray created a iron sight curve at the end of the body, to give enough distance to be a co-Witness back up sight, and also added two white dots on the curve. With the ultra short design, the red dot provides a distance/gap on some of full size optics ready pistol, in addition to the LED dot and pistol equipped iron sight.

The overall length is around 15-20% shorter than other major competitors. Not plastic body with polymer lens. Comes with screws for several Optics Ready handguns. Does not fit optic plate/cut made for doctor type footprint. For the rear of part of the red dot to become a "back up iron sight". Just like $400 rmr competitors, put the provided rubber cover on it, it does not has a on/off power button. Hard coated aircraft aluminum and multi-coated glass.

The shorter design allow this sight to be able to sit in to all optic cuts/plates/adapters that designed for rmr. Ade stingray is designed to to the smallest and lightest red dot to fit any pistol mounting plate/slide/cut that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots. The light turns brighter or lower automatically. For some optics ready pistols with a large optic cut, there will be a gap between the optic rear dot and pistol rear iron sight.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberSTINGRAY-T

7. Vortex

#ad

6 MOA Dot, Vortex Optics Viper Red Dot Sight

#ad
Vortex #ad - Power and illumination controls are easy for shooters to access and adjust. Waterproof and shockproof construction ensure your Viper Red Dot is ready for all conditions; O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.

Hard anodized finish- highly durable low-glare matte finish. The viper red dot sight has a super low-profile making it perfect for handguns with cut-out slides. 1 moa windage and elevation adjustments move the dot to your point of aim. The fully multi-coated, unobstructed field of view while Armortek coatings protect your lens from oil, ultra-clear lens offers a wide, dirt, and scratches. The viper's low height allows it to co-witness with iron sights and the 6 MOA dot is easy to pick up and get you on target fast.
BrandVortex #ad
ManufacturerVortex Optics #ad
Height2.3 Inches
Length4.5 Inches
Weight0.4 Pounds
Width5.4 Inches
Part NumberVRD-6
ModelVRD-6
WarrantyManufacture Warranty

8. Sightmark

#ad

Sightmark Mini Shot M-Spec FMS Reflex Sight

#ad
Sightmark #ad - 10 reticle brightness levels and 2 night vision brightness settings. Steel protective shield. 3 moa red dot reticle. Up to 30, 000 hour Battery life on lowest setting. 100% waterproof and dustproof.
BrandSightmark #ad
ManufacturerSellmark Corporation #ad
Height3 Inches
Length6 Inches
Weight0.19 Pounds
Width4 Inches
Part NumberSM26043
ModelSM26043
WarrantyLimited Lifetime Warranty

9. Ade Advanced Optics

#ad

Ade Advanced Optics rd3-012 6MOA Red Dot Micro Mini Reflex Sight for Handgun

#ad
Ade Advanced Optics #ad - Top load system, no need to Remove the sight to change the Battery. 6 moa dot. Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast.

Shockproof, fogproof and waterproof for 30 minutes under 4ft water. Feature 1 M. O. A wind age and elevation adjustments with audible click. Come with protected cover, Adjustment dailing plate, adjustment wrench, User Manual and Picatinny mounting plate. Every time you turn on the dot it stays the same brightness level last time it was turned off. Additional mounting plates for hunguns sells separately. Red dot has multi brightness level with one adjustment button. 1. 75" length x1. 25" width x1. 15" height. The red dot is compatible with ade handgun mounts for glock barreta hk ups SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part Numberrd3-012
Modelrd3-012

10. Ade Advanced Optics

#ad

Ade Advanced Optics RD3-009-2 Red Dot Sights

#ad
Ade Advanced Optics #ad - It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,. Any plate made for those brands also fits this sight. This red dot comes with a picatinny mounting base. We have made it more durable to withstand recoil and improved the ability to hold zero.

It is also compatible with varies handgun mounting plates that replace rear sight dovetail. We have made several improvements since it's initial release in 2014. Waterproof/shock/fog resistant. Designed in Oregon. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.

Ade model rd3-006, rd3-012, meopta, rd3-009, docter, insight, rd3-013, burris fastfire, rd3-015 are designed to fit the slide/footprint of plate made for Vortex Venom, Eotech MRDS. Powered by a lithium CR2032 batteryIncluded. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 moa. 5 illumination Settings.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-009-2
ModelRD3-009-2