Top 10 Buoys For Boat – Boat Fenders

As an Amazon Associate I earn from qualifying purchases.

1. Polyform

#ad

Polyform G-1 Boat Fender White

#ad
Polyform #ad - This small craft fender ships as a single unit pre-inflated without an inflation valve. Tall with an eye diameter of 0375 in. G-1 boat fenders measure 3. 5 in. G-1 fenders are recommended for boats under 10 ft. Diameter and 12. 8 in. A general purpose value boat fender made by Polyform and manufactured in the USA. In length. Designed for recreational trailered boats in protected moorings.
BrandPolyform #ad
ManufacturerPolyform US #ad
Height3.5 Inches
Length12.8 Inches
Weight0.45 Pounds
Width3.5 Inches
Part NumberG-1 White
ModelG-1 White

2. Polyform

#ad

Polyform A-1 Buoy Red 11 x 15 in.

#ad
Polyform #ad - Commonly used as a marker buoy, anchor buoy, or mooring buoy, and provides enhanced protection when used as a boat fender. Tall with 1 in. Long, when used as a fender. Suggested for boats approximately 20-30 ft. A-1 buoys measure 11 in. This product ships deflated inflate using 1 a Polyform Inflation Adapter with any standard tire pump connection 2 a tapered nozzle blow gun or 3 a Polyform specialty hand pump. Ropehold eye diameter. Diameter by 15 in. A versatile, heavy duty buoy made by Polyform and manufactured in the U. S. A.
BrandPolyform #ad
ManufacturerPolyform US #ad
Height11 Inches
Length15 Inches
Weight2.4 Pounds
Width11 Inches
Part NumberA-1 RED
ModelA-1 RED

3. TaylorMade

#ad

Orange, 15 inch Diameter, Taylor Made Products 61146 Tuff End Inflatable Vinyl Boat Buoy

#ad
TaylorMade #ad - Tri-valve for easy inflation with football needle or compressor. Recommended boat size - 50 to 60 Feet. Constructed from flexible and resilient marine grade vinyl. Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles. Tuff end fenders feature a seamless one piece construction, the strongest in the industry. Made in the uSA for heavy duty marine applications.
BrandTaylorMade #ad
ManufacturerTaylor Made® #ad
Height1 Inches
Length1 Inches
Weight4.8 Pounds
Width1 Inches
Part Number61146
Model61146

4. Extreme Max

#ad

Extreme Max 3006.7384 BoatTector Fender Value 4-Pack, 6.5" x 22”, Black

#ad
Extreme Max #ad - Includes four 6. 5” x 22” boattector fenders and four 3/8” x 5' fender lines. Uv stabilized, chemically resistant. Equipped with a needle valve to inflate or deflate each fender to a desired pressure needle valve pump not included. Reinforced molded eyelets ensure longevity and strength. Two-year limited.
BrandExtreme Max #ad
ManufacturerExtreme Max #ad
Weight10 Pounds
Part Number3006.7384
Model3006.7384

5. attwood

#ad

White, attwood Boat Fender 3 Pack, 5"

#ad
attwood #ad - Oval shape and ribbed sides resist rolling against hull. Made in the usa from tough lightweight polymetric material that is soft to the touch, easy on hulls and is resistant to UV degradation. Lifetime guarantee against chalking, marring, splitting, deflating and crushing. Attwood softside boat fenders protect your boat from damage from docks and other boats. Simple one piece construction with no leaking air valves to maintain.
Brandattwood #ad
ManufacturerATTAC - pallet ordering #ad
Height14 Inches
Length23 Inches
Weight2.9 Pounds
Width5.25 Inches
Part Number93553P2
Model93553P2

6. Goplus

#ad

Goplus 4 Ribbed Marine Boat Fender Vinyl Bumper Dock Shield Durable Black, 6.5" X 23"

#ad
Goplus #ad - Buffer collisionthis boat fender assists to prevent the damage from your boat or watercraft, especially when speeds into the shore or docking, also happens the unfortunate situation to collide with other ships. The curved design on the edge can properly give the power to resist collision. And this vinyl material can make the fender easy to clean and resist stain to keep the bright color all the time.

And reinforced rope holes on both ends and the fenders ribbed design is made for all around resilient protection of your sail. Vinyl materialit is molded out of commercial strength marine vinyl, also the material has the function of UV resistance, also do good at aging resistance and gas tightness. Customer service & guaranteewith our clear manual, it's easy to assemble. If there is any part missing or damaged during shipping, please contact us first, we will solve the problem as the way you want replacement at no charge or discount.

Beside, the vertical or horizontal position offers you more choice to hang them. Strong resistance to compressionthe material of this boat fender is non-abrasive PVC, with ribbed on all sides for extra protection to enhance strength, increase friction and resist abrasion for boat. If there is any questions please feel free to contact with us, our excellent customer service team will response in 24 hours. As the material shows above, its UV resistance and aging resistance also can help prolong its life.
BrandGoplus #ad
ManufacturerSuperbuy #ad
Part NumberBoat Fender

7. X-Haibei

#ad

Dock Bumper Ball Inflatable Vinyl A-Series Shield Protection Marine Mooring Buoy Red, X-Haibei 1 Boat Fender Ball Round Anchor Buoy, A29 D11.8H13.8 inch

#ad
X-Haibei #ad - Use your finger to press the surface. It can down a little easily. The recommend inflation is 2 psi, about 0013mpa. Best quality environmental protection raw materialPVC, UV-Protected.

The boat fender is deflated when shipped, buyers need inflate by them selves. We give specialized inflating needles for free. Quanity: 1pcs, size:d11. 8 * h13. 8 inch. Please do not inflate too much air. It is better to reserve some space for it. The products do not fade. 1 year warranty. The scope of application: small boat / navigation buoy / mooring buoy / yacht / yacht dock, also can be use as floater / boat dock / water safety buoy.
BrandX-Haibei #ad
ManufacturerX-Haibei #ad
Height2 Inches
Length17.8 Inches
Weight2.2 Pounds
Width8.5 Inches
Part NumberBT0288-1

8. X-Haibei

#ad

X-Haibei Pair of Boat Fender Ball Round Anchor Buoy, A29 D11.8H13.8 inch, Dock Bumper Ball Inflatable Vinyl A-Series Shield Protection Marine Mooring Buoy Red

#ad
X-Haibei #ad - The boat fender is deflated when shipped, buyers need inflate by them selves. We give specialized inflating needles for free.

Please do not inflate too much air. It is better to reserve some space for it. The products do not fade. 1 year warranty. Quanity: 2pcs. The scope of application: small boat / yacht dock, also can be use as floater / yacht / boat dock / mooring buoy / navigation buoy / water safety buoy . Best quality environmental protection raw materialPVC, UV-Protected. Use your finger to press the surface. It can down a little easily. The recommend inflation is 2 psi, about 0013mpa.
BrandX-Haibei #ad
ManufacturerX-Haibei #ad
Weight4.43 Pounds
Part NumberBT0288-2

9. Polyform

#ad

Polyform G-6 Boat Fender Black

#ad
Polyform #ad - This fender ships as a single unit pre-inflated with a Polyform inflation valve to adjust pressure. A general purpose value boat fender made by Polyform and manufactured in the USA. G-6 boat fenders measure 11 in. Diameter and 30 in. G-6 fenders are recommended for boats between 30 and 40 ft. Tall with an eye diameter of 0875 in. Designed for recreational trailered boats in protected moorings. In length.
BrandPolyform #ad
ManufacturerPolyform US #ad
Height11 Inches
Length30 Inches
Weight6.5 Pounds
Width11 Inches
Part NumberG-6 Black
ModelG-6 Black

10. INNOCEDEAR

#ad

INNOCEDEAR Double-Braided Nylon Dock Line Navy Blue,6490 lbs Breaking Strength,L: 15 ft. D: 1/2 inch Eyelet: 12 inch, 4 Pack.Hi-Performance Marine Boats Mooring Rope Dock Line

#ad
INNOCEDEAR #ad - Our superior marine quality double braided ropes are perfect for the job. The marine grade nylon has 24 super strong strands with a diameter of 1/2 inch. Professional finished: the professional finishing of these 15 foot durable nylon ropes is outstanding. Marine-grade boat ropes : secure your ship in severe weathering.

It has been shown to be up to 30% stronger than the 3 strand twisted rope, which makes it highly durable with the ability to act as a perfect shock absorber. Double-braided structure: you will be able to safely secure your boat in almost all elements when you use this high quality double-braided rope. 4 dock lines:each of the dock lines is 15 feet in length. They can withstand all the negative effects of the environment, mold, including the usual salt, oil and UV rays. Heavy loads can easily be tethered without worry that the nylon rope will kink or rotate.

They are ultra strong and will not fray or chafe. They are 15 feet in length and are recommended to tethering small to medium size boats that are no longer than 35 feet in length. Thicker&stronger: the double-braided nylon rope is double-braided which gives them the strength you need. Although the navy nylon rope is super strong, it will keep your boat's paintwork intact. As these are the most sought after measurements, this boat accessory is sold in a packs of 4 and is guaranteed for your boat docking solutions.
BrandINNOCEDEAR #ad
ManufacturerInnocedear-fac #ad
Part NumberInnocedear-fac