RPM 80212 Front A-Arms Right Black Revo

#ad
#ad
RPM RPM80212 #ad - Backed by rPM's world-renowned breakage warranty. Key featuresnearly identical in weight to stock a-armsredesigned for incredible durability under the toughest of conditionsexcess a-arm endplay has been eliminated for more accurate caster and toe angle settingsAngled leading and trailing edges eliminate dirt build-upNo low-hanging cross-braces or shock mounting areas providing better ground clearanceMassive shock rod mounting areas for improved rigidityAvailable in black, blue, & dyeable whiteLess than half the price of aluminum A-armsMolded from our bulletproof blend of nylons and backed by our world renowned breakage warrantyOverviewRPM Revo A-Arms are the only alternative to bulletproof performance that rivals any competition! Fits all versions of the Revo.

RPM 80212 Front A-Arms Right Black Revo #ad - Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States. Requires one package of left front A-arms, one package of Right Front A-arms, and two packages of Rear A-arms to complete.

More information about RPM RPM80212 #ad

RPM Summit, Revo and E-Revo Front Left A-arms, Black

#ad
#ad
HRP Distribution RPM70372 #ad - If you're tired of replacing broken stock parts over and over, give RPM a try. That is no longer an issue with these A-arms. Designed to increase durability. With a revamped cross-brace to clear the t-lock differential, our Summit front left A-arms will allow full RPM Summit & Revo Black Front Left A-arms suspension travel and significantly improve overall suspension durability.

RPM Summit, Revo and E-Revo Front Left A-arms, Black #ad - Rpm front a-arms for the traxxas Summit are molded from our indestructible blend of engineering grade nylons for unmatched performance and durability. Proudly made in the USA. Our front right a-arms for the traxxas revo reference rpm #80212 & #80215 are already compatible with the Summit but due to the extended T-Lock differential on the left side, our Revo front left A-arms would not fit.

Replaces weaker stock components. Every rpm molded part in manufactured in the USA and carries with it a limited lifetime warranty against breakage. In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit.

More information about HRP Distribution RPM70372 #ad


Similar products



RPM 80562 Revo True Track Rear A-Arm Conversion Black

#ad
#ad
HRP (Level 3 Products) RPM80562 #ad - For use on the Revo. By getting rid of the rear toe links, we've completely eliminated all rear bump steer! That means the rear toe angle remains consistent throughout the entire range of suspension travel, providing superior rear end tracking regardless of the terrain. Proudly made in the USA. Backed by rPM's world-renowned breakage warranty.

Rpm is a proud american manufacturer designing and manufacturing 100-Percent of our molded products right here in the United States. Rear toe angles are nearly impossible to set accurately and there isn't a gauge currently made that can accurately identify whether each individual wheel's toe angle is set correctly in relation to the chassis.

RPM 80562 Revo True Track Rear A-Arm Conversion Black #ad - The rpm true-track rear end kit completely eliminates the rear toe links, locking in the rear toe angle at a solid 1. 5 degrees per side for a total rear toe-in angle of 3 degrees. All aspects of the rpm true-track Conversion Kit have been beefed up for rugged durability and slop free movement throughout its range of travel.

Designed to increase durability. Tech notes: these rear end kits work on all versions of the Traxxas Revo. Replaces weaker stock components. Additionally, we've incorporated our oversized bearings into the new RPM axle carrier design, providing an additional 2mm more bearing contact with the axle while doubling the bearing load rating & tripling the fatigue rating over the stock bearings.

More information about HRP (Level 3 Products) RPM80562 #ad


Similar products



Traxxas 5632 Rear Chassis Brace 1/10 Summit, E-Revo

#ad
#ad
Traxxas 5632 #ad - Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Rpm is a proud american manufacturer designing and manufacturing 100-Percent of our molded products right here in the United States.

These kits will not with Traxxas No. 5356 120-lt long Travel Rockers. Strengthen your e-revo or Summit with this brilliant blue-anodized chassis brace to conquer massive jumps. For use on the Revo. Strengthens rear chassis for massive jumps. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

Traxxas 5632 Rear Chassis Brace 1/10 Summit, E-Revo #ad - Includes mounting screws. Tech notes: these rear end kits work on all versions of the Traxxas Revo. This product is made from high quality materials and designed for long-lasting performance. Installs in minutes. Replaces weaker stock components. Mounting screws are included. Proudly made in the USA.

More information about Traxxas 5632 #ad


Similar products



Traxxas 5318X Red-Anodized Aluminum Pushrod pair

#ad
#ad
Traxxas TRA5318X #ad - This product is made from high quality materials and designed for long-lasting performance. Anodized red 7075-T6 aluminum. 7075-t6 aluminum push rods decrease the total weight of the truck by 31 grams. Backed by rPM's world-renowned breakage warranty. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

Strengthens rear chassis for massive jumps. Replaces weaker stock components. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. Rod ends included. These kits will not with Traxxas No. 5356 120-lt long Travel Rockers. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

Traxxas 5318X Red-Anodized Aluminum Pushrod pair #ad - Rpm is a proud american manufacturer designing and manufacturing 100-Percent of our molded products right here in the United States. When using progressive-2 rockers, spacers part # 5133 are required for use with the 5318 or 5318X push rods. 102mm Length. Fits 1/10 scale E-Revo and Summit. Strong, 7075-t6 aluminum versions of each are available to decrease the total weight of the truck by 31 grams.

More information about Traxxas TRA5318X #ad


Similar products



RPM 80582 Axle Carriers/Oversized Bearings Black Revo/Slayer

#ad
#ad
HRP (Level 3 Products) RPM80582 #ad - For the traxxas slayer, revo, e-revo, t-maxx 2.5r, t-maxx 3. 3 and e-maxx 16. 8. Rpm axle carriers will not work in conjunction with Slayer/Revo 120-LT Long Travel rockers Traxxas #5356. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability.

Anodized red 7075-T6 aluminum. Designed to increase durability. Brilliant blue-anodized aluminum. Strengthens rear chassis for massive jumps. Tech notes: these rear end kits work on all versions of the Traxxas Revo. Proudly made in the USA. Replacement bearing sets #80570 come with 2 inner 21mm bearings & 2 outer 15mm bearings.

RPM 80582 Axle Carriers/Oversized Bearings Black Revo/Slayer #ad - 7075-t6 aluminum push rods decrease the total weight of the truck by 31 grams. Overviewrpm slayer, Revo, T-Maxx 2. 5r, t-maxx 3. 3 & e-maxx 16. 8 axle carriers are sold with 1 left and 1 right axle carrier, 4 Delrin bushing caps, 4 aluminum setscrews, 2 inner 21mm bearings, 2 outer 15mm bearings, and detailed instructions to help install them on your truck.

Replaces weaker stock components.

More information about HRP (Level 3 Products) RPM80582 #ad


Similar products



Traxxas 5378X Pivot Ball Caps and Dust Boots set of four

#ad
#ad
Traxxas TRA5378X #ad - Designed to increase durability. Proudly made in the USA. This product is made from high quality materials and designed for long-lasting performance. Brilliant blue-anodized aluminum. For use on the Revo. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Req. When using progressive-2 rockers, spacers part # 5133 are required for use with the 5318 or 5318X push rods. This is for use on RC vehicles, consult your user's manual for exact parts listings. Anodized red 7075-T6 aluminum. Use with long travel or #5357 progressive-1 rockers. Fits 1/10 scale E-Revo and Summit.

Traxxas 5378X Pivot Ball Caps and Dust Boots set of four #ad - Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. These kits will not with Traxxas No. 5356 120-lt long Travel Rockers. Tech notes: these rear end kits work on all versions of the Traxxas Revo. Strengthens rear chassis for massive jumps.

Includes mounting screws. Replaces weaker stock components.

More information about Traxxas TRA5378X #ad


Similar products



Traxxas 5451R Revo/Maxx Steel CV Driveshafts Assembled with Boots

#ad
#ad
Traxxas TRA5451R #ad - This product is made from high quality materials and designed for lasting performance. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks. The nickel plated steel shafts, and red-anodized aluminum accents not only look good, blue silicone boots, they are designed to exacting specifications for ultimate strength and performance.

Designed to increase durability. Set of four pivot ball caps. 7075-t6 aluminum push rods decrease the total weight of the truck by 31 grams. Includes mounting screws. Rod ends are already installed making it simple to just bolt them on the truck. Strengthens rear chassis for massive jumps. Replaces weaker stock components.

Traxxas 5451R Revo/Maxx Steel CV Driveshafts Assembled with Boots #ad - 102mm Length. Designed to handle the extreme horsepower and articulation that your Traxxas truck can dish out. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

T-maxx models #4902, 4909, 4908, Revo 3.

More information about Traxxas TRA5451R #ad


Similar products



Traxxas 5472 Wheelie Bar

#ad
#ad
Traxxas TRA5472 #ad - Use with long travel or #5357 progressive-1 rockers. Set of four pivot ball caps. This product is made from high quality materials and designed for lasting performance. Brilliant blue-anodized aluminum. The wheelie bar assembly is easy to install for controlled wheelies on demand. Includes mounting screws. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks.

Adjustable wheelie bar has four separate adjustments positions to control wheelie height. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. For use on the Revo. Four snap-in adjustment positions allow you to choose how extreme you want your wheelie action to be.

Traxxas 5472 Wheelie Bar #ad - Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. When it is time to head off-road, a convenient quick release tab makes removal and installation a snap. Anodized red 7075-T6 aluminum. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States.

Fits all 1/10 Revos, nitro or electric. Backed by rPM's world-renowned breakage warranty.

More information about Traxxas TRA5472 #ad


Similar products



Traxxas 5337 Skid Plate Set, Revo

#ad
#ad
Traxxas TRA5337 #ad - This is for use on RC vehicles, consult your user's manual for exact parts listings. This product is made from high quality materials and designed for lasting performance. No one has done more than traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby.

Traxxas 5337 Skid Plate Set, Revo #ad - Includes mounting hardware and instructions. Backed by rPM's world-renowned breakage warranty. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Fits Traxxas Revo. Brilliant blue-anodized aluminum. These kits will not with Traxxas No. 5356 120-lt long Travel Rockers. Use with long travel or #5357 progressive-1 rockers.

Proudly made in the USA. For the traxxas slayer, revo, e-revo, t-maxx 2.5r, t-maxx 3. 3 and e-maxx 16. 8. Rpm axle carriers will not work in conjunction with Slayer/Revo 120-LT Long Travel rockers Traxxas #5356.

More information about Traxxas TRA5337 #ad


Similar products



Traxxas 5330 Front Revo Bulkhead

#ad
#ad
Traxxas TRA5330 #ad - Front and rear skid plate set. Replaces worn or damaged parts. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

. For the traxxas slayer, e-revo, revo, t-maxx 2.5r, t-maxx 3. 3 and e-maxx 16. 8. Rpm axle carriers will not work in conjunction with Slayer/Revo 120-LT Long Travel rockers Traxxas #5356. This is for use on rc vehicles such as the Traxxas Revo; consult your user's manual for exact parts listings. These kits will not with Traxxas No.

Traxxas 5330 Front Revo Bulkhead #ad - 5356 120-lt long Travel Rockers. Adjustable wheelie bar has four separate adjustments positions to control wheelie height. Fits Traxxas Revo. Rpm is a proud american manufacturer designing and manufacturing 100-Percent of our molded products right here in the United States. Proudly made in the USA.

More information about Traxxas TRA5330 #ad


Similar products