Orange Aluminum – Metal T-Track – Aluminum Extrusion – Slider Bar for 1/4”-20 Hex Head Bolts – Mount, Position and Hang Clamps & Fixtures – Clear Anodize Finish, 48 Inch Track

#ad
#ad
Orange Aluminum OA7150 #ad - The metal extrusion is ideal for constructing jigs on workbenches and drill press tables and positioning jigs, stops, and hold-downs on table saws. Need more aluminum installation options? Orange Aluminum was founded in 2007 and is headquartered in Orange County, CA, USA. Quick and easy to use, to reposition clamps and fixtures, loosen the bolt and move to a new position on the slider bar.

Aluminum is our passion and specialty, shape, making us a trusted resource for aluminum extruded trim, and bar supply. The extrusion has a clear anodized finish to ensure corrosion resistance, and is sleeved to protect the track's finish. The high quality metal T-bar features punched holes 3" on center to accommodate #8 pan head screws.

Orange Aluminum – Metal T-Track – Aluminum Extrusion – Slider Bar for 1/4”-20 Hex Head Bolts – Mount, Position and Hang Clamps & Fixtures – Clear Anodize Finish, 48 Inch Track #ad - We provide both standard and custom aluminum extrusion solutions and work directly with local mills to provide you with high quality products at competitive prices. Aluminum t-track rail this specialty aluminum T track is designed for sliding in 1/4"-20 hex head bolts to mount, position, and hang clamps and fixtures.

T-track hardware: the rail slot is ideal for positioning jigs, stops, clamps, and hold down fixtures on table saws. Easy to use: specialty metal t track allows you to slide in and reposition 1/4"-20 hex head bolts in seconds. Pre-drilled: t-bar has punched holes 3" on center - slots accommodate #8 pan head screws.

Clear anodize finish: The aluminum extrusion is corrosion resistant and protected from oxidizing.

More information about Orange Aluminum OA7150 #ad

POWERTEC 71068 T-Track Knobs, 1/4-20 by 1-1/2-Inch Bolts, Washers, Set of 10

#ad
#ad
POWERTEC 71068 #ad - Includes 10 sets of 1/4-inch thru hole knobs, 1/4-20 x 1-1/2-Inch bolts and washers. The powertec t-track knobs contains, 10 washers, 10 knobs, and 10 bolts are of high quality and great for building jigs and fixtures. Easy use and works with any T-track that accepts standard 1/4-Inch bolt heads. Great for jig building and other projects.

Fasteners can be used with material that is less or equal to 1-Inch thickness. It is effortless and simple to use with any project and is a must have in any shop inventory.

More information about POWERTEC 71068 #ad


Similar products



Taytools Flip Stop Swing Away Stop for Any T Track That Accepts 1/4” Hex Head Bolts

#ad
#ad
Taylor Toolworks #ad - Made from anodized aluminum. Works with any t Track that accepts 1/4 inch hex bolts. Remove the guesswork when making repetitive cuts on the table or miter saw. Great for jig building and other projects. Easy use and works with any T-track that accepts standard 1/4-Inch bolt heads. The flip stop provides precise measurements when you need them and then swings out of the way when you don't.

These taytools flip stops can be used with any T track that accepts a ¼" hex bolt and turns your saw into a precise cutting system. Simply slide the stop in the t track to the dimension you'd like to cut, place the board against the stop, and cut to the exact length time after time. Works on fences at least 2" high.

Taytools Flip Stop Swing Away Stop for Any T Track That Accepts 1/4” Hex Head Bolts #ad - Prevents measuring errors. Includes 10 sets of 1/4-inch thru hole knobs, 1/4-20 x 1-1/2-Inch bolts and washers. No matter on what machine used, they will produce cuts faster and more accurate than using a tape measure and pencil. Well-built from anodized aluminum. They can be used on miter saws, table saws, drill presses and more.

Fasteners can be used with material that is less or equal to 1-Inch thickness. Set to desired measurement and make repetitive cuts without re-measuring each time.

More information about Taylor Toolworks #ad


Similar products



Starrett Measure Stix SM412WRL Steel White Measure Tape with Adhesive Backing, English Graduation Style, Right To Left Reading, 12' Length, 0.5" Width, 0.0625" Graduation Interval

#ad
#ad
Starrett SM412WRL #ad - Measure stix is manufactured with high quality precision steel for extended service use. Great for jig building and other projects. Can be used on miter saws, table saws, drill presses and more. Reads left to right or right to left. It is produced with a permanent adhesive backing that will stick to almost any work surface providing convenient, at-a-glance measurements.

Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements. Includes 10 sets of 1/4-inch thru hole knobs, 1/4-20 x 1-1/2-Inch bolts and washers. Manufactured of high quality precision steel for extended service use. Fasteners can be used with material that is less or equal to 1-Inch thickness.

Starrett Measure Stix SM412WRL Steel White Measure Tape with Adhesive Backing, English Graduation Style, Right To Left Reading, 12' Length, 0.5" Width, 0.0625" Graduation Interval #ad - They can be mounted on work benches, drafting tables, saw tables, and more. Stop flips up and out of the way when you need to make a cut in the middle of a piece. Right or right to left print orientation Easy use and works with any T-track that accepts standard 1/4-Inch bolt heads. Set to desired measurement and make repetitive cuts without re-measuring each time.

Mounts on work benches, drafting tables, saw tables, etc. Easily cut to size with scissors. Works with any t Track that accepts 1/4 inch hex bolts.

More information about Starrett SM412WRL #ad


Similar products



Innovative Components AN4C-5S221 1.38" Star knob thru hole 1/4-20 steel zinc insert black pp Pack of 10

#ad
#ad
Innovative Components AN4C----5S2--21 #ad - Reads left to right or right to left. Includes 10 sets of 1/4-inch thru hole knobs, 1/4-20 x 1-1/2-Inch bolts and washers. Works with any t Track that accepts 1/4 inch hex bolts. An4c-5s2-21. 1. 38" star knob thru hole 1/4-20 steel zinc insert black pp Easy use and works with any T-track that accepts standard 1/4-Inch bolt heads.

Mounts on work benches, saw tables, drafting tables, etc. Easily cut to size with scissors. Set to desired measurement and make repetitive cuts without re-measuring each time. Manufactured of high quality precision steel for extended service use. Made from anodized aluminum. Won't crack, become brittle or discolor.

Innovative Components AN4C-5S221 1.38" Star knob thru hole 1/4-20 steel zinc insert black pp Pack of 10 #ad - Can be used on miter saws, table saws, drill presses and more. Fasteners can be used with material that is less or equal to 1-Inch thickness. Stop flips up and out of the way when you need to make a cut in the middle of a piece. Contemporary satin Textured Finish, Scratch and Dirt resistant. Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements.

Popular choice with smooth lines and finger grip spacing for easy turning.

More information about Innovative Components AN4C----5S2--21 #ad


Similar products



24" Aluminum T-track

#ad
#ad
Orange Aluminum OA7150 #ad - Check out our different cut lengths or call us for longer lengths via orange aluminum website!! Can be used on miter saws, table saws, drill presses and more. An4c-5s2-21. Stop flips up and out of the way when you need to make a cut in the middle of a piece. Great for jig building and other projects. Includes 10 sets of 1/4-inch thru hole knobs, 1/4-20 x 1-1/2-Inch bolts and washers.

Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements. Contemporary satin Textured Finish, Scratch and Dirt resistant. Clear anodized finish - Punched 8" On Center & Sleeved to protect finish. Specialty aluminum "t" track allows you to slide in 1/4"-20 hex head bolts to mount bolts not included.

Set to desired measurement and make repetitive cuts without re-measuring each time. Try it for yourself today!! technical details for t-track oa7150 alloy:6063-t5 ultra-corrosive resistant architectural grade alloy Finish: Clear Anodize ORANGE ALUMINUM is our company name : Fab: Punched and countersunk 3" On Center, to accommodate #8 pan head screws Easy use and works with any T-track that accepts standard 1/4-Inch bolt heads.

24" Aluminum T-track #ad - Rate us & share your project pictures - we love helping accomplish big or small projects! Now we're taking our products to the largest online store - Amazon! We are a metal center, with no minimums and ability to beat most competitor pricing. Fasteners can be used with material that is less or equal to 1-Inch thickness.

More information about Orange Aluminum OA7150 #ad


Similar products



E-TING 4Pcs Hand Tool Toggle Clamp 201B Antislip Red Horizontal Clamp 201-B Quick Release Tool

#ad
#ad
E-TING 4xSKU10645#4 #ad - Works with any t Track that accepts 1/4 inch hex bolts. Clear anodized finish - Punched 8" On Center & Sleeved to protect finish. Package included: 4 pcs e-tING GH-201B horizontal quick release toggle clamp. Reads left to right or right to left. Rate us & share your project pictures - we love helping accomplish big or small projects!

Great for jig building and other projects. Manufactured of high quality precision steel for extended service use. With its sturdy construction and efficient design, this essential tool ensures that you achieve a rock-solid grip on your work piece, thus providing a hold that won't slip. Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements.

E-TING 4Pcs Hand Tool Toggle Clamp 201B Antislip Red Horizontal Clamp 201-B Quick Release Tool #ad - 9. 5 x 6. 5 x 3. 8cm/ 3. 7" x 2. 56" x 1. 5" l*w*H. Features a low height design and mechanism, to allow for maximum clearance. Vinyl colored grip for easy identification and comfort.

More information about E-TING 4xSKU10645#4 #ad


Similar products



POWERTEC 70152 Router Dust Port, 2-1/2-Inch

#ad
#ad
POWERTEC 70152 #ad - Design: low height design. Package included: 4 pcs e-tING GH-201B horizontal quick release toggle clamp. Can be used on miter saws, table saws, drill presses and more. 9. 5 x 6. 5 x 3. 8cm/ 3. 7" x 2. 56" x 1. 5" l*w*H. Won't crack, become brittle or discolor. Easy use and works with any T-track that accepts standard 1/4-Inch bolt heads.

POWERTEC 70152 Router Dust Port, 2-1/2-Inch #ad - Check out our different cut lengths or call us for longer lengths via orange aluminum website!! Stop flips up and out of the way when you need to make a cut in the middle of a piece. Made from anodized aluminum. Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements.

Manufactured of high quality precision steel for extended service use. Predrilled mounting holes allow for easy and secure installation. Easily mounts to router and shaper tables. Clear anodized finish - Punched 8" On Center & Sleeved to protect finish. An4c-5s2-21. Holding capacity force: 198 lbs.

More information about POWERTEC 70152 #ad


Similar products



Lot of 10 Each Sliding Tee Bolts with 1/4 20 Threads 1-3/4" Long for Jigs and T Track TB-1/4-1.75

#ad
#ad
Taylor Toolworks #ad - Rate us & share your project pictures - we love helping accomplish big or small projects! Great for jig building and other projects. Application: a rock-solid grip to install on jigs, tool fixtures, or movable bases. 1-3/4" long. Works with any t Track that accepts 1/4 inch hex bolts. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance.

Lot of 10 Each Sliding Tee Bolts with 1/4 20 Threads 1-3/4" Long for Jigs and T Track TB-1/4-1.75 #ad - Easily mounts to router and shaper tables. Clear anodized finish - Punched 8" On Center & Sleeved to protect finish. Design: low height design. Lot of 10 each t bolts with 1/4 20 threads 1-3/4" long for jigs, fixtures and T Track. Specialty aluminum "t" track allows you to slide in 1/4"-20 hex head bolts to mount bolts not included.

Package included: 4 pcs e-tING GH-201B horizontal quick release toggle clamp. Ideal for positioning jigs, stops, and hold downs on table saws. Set to desired measurement and make repetitive cuts without re-measuring each time. 1/4 20 threads. Made of durable ABS plastic material. Made from anodized aluminum.

More information about Taylor Toolworks #ad


Similar products



Starrett Measure Stix SM44ME Steel White Measure Tape with Adhesive Backing, English/Metric Graduation Style, Left To Right Reading, 4' 1.2m Length, 0.5" 13mm Width, 0.0625" Graduation Interval

#ad
#ad
Starrett SM44ME #ad - Design: low height design. Includes 10 sets of 1/4-inch thru hole knobs, 1/4-20 x 1-1/2-Inch bolts and washers. Manufactured of high quality precision steel for extended service use. Size: approx. 9. 5 x 6. 5 x 3. 8cm/ 3. 7" x 2. 56" x 1. 5" l*w*H. 10 each sliding T bolts. Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements.

Popular choice with smooth lines and finger grip spacing for easy turning. Easily mounts to router and shaper tables. An4c-5s2-21. Perfects for all manner of shop jigs, fixtures and set ups. Made from anodized aluminum. Reads left to right or right to left. Works with any t Track that accepts 1/4 inch hex bolts. Measure stix is manufactured with high quality precision steel for extended service use.

Starrett Measure Stix SM44ME Steel White Measure Tape with Adhesive Backing, English/Metric Graduation Style, Left To Right Reading, 4' 1.2m Length, 0.5" 13mm Width, 0.0625" Graduation Interval #ad - Won't crack, become brittle or discolor. Stop flips up and out of the way when you need to make a cut in the middle of a piece. Package included: 4 pcs e-tING GH-201B horizontal quick release toggle clamp.

More information about Starrett SM44ME #ad


Similar products



POWERTEC QTB1005 Tee Bolt 1/4-Inch-20, 2-1/2-Inch Long, 20-Pack

#ad
#ad
POWERTEC QTB1005 #ad - Built to withstand strong torque and heavy-duty use; Zinc plated for durability and rust-resistance. Popular choice with smooth lines and finger grip spacing for easy turning. Perfects for all manner of shop jigs, fixtures and set ups. An4c-5s2-21. Reads left to right or right to left. Head size is 1/2" x 5/8".

1/4 20 threads. Great for jig building and other projects. Precision-machined head and threaded bolt insure optimal strength and functionality. Won't strip when over-tightening; Provides optimal, dependable clamping connections. Our bolts feature clean, rugged threads that offer easy loosening and tightening action, so handy when adjusting or customizing jigs/fixtures.

POWERTEC QTB1005 Tee Bolt 1/4-Inch-20, 2-1/2-Inch Long, 20-Pack #ad - Powertec threaded t-bolts make satisfying, efficient work of creating the jigs and fixtures so necessary in any productive workshop, home-based or industrial. Rate us & share your project pictures - we love helping accomplish big or small projects! Essential when building or customizing workshop jigs and fixtures.

Reads left to right or right to left. Application: a rock-solid grip to install on jigs, tool fixtures, or movable bases. Contemporary satin Textured Finish, Scratch and Dirt resistant.

More information about POWERTEC QTB1005 #ad


Similar products