OESS Lab Clamp 3 Prong Finger Style Laboratory 360°Swivel Type Rubber-Coated Head

#ad
#ad
OESS #ad - OESS Lab Clamp 3 Prong Finger Style Laboratory 360°Swivel Type Rubber-Coated Head #ad - 3 prong finger style rubber-coated head 360°Swivel lab clamp Sold as 1 pcs 360 degrees swivels 3 finger lab clamp. 3 finger clamp accepts rods up to 20 mm. Covered jaws for protection and grip. Strong die-cast construction. Maximum width of Jaw opening is 90mm.

More information about OESS #ad

American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size

#ad
#ad
American Educational 7-G15-A #ad - Type is coated with an acid resistant finish. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Available in cast iron. Strong and dependable support. Base size: 8" length by 5" width, rod size: 3/8" diameter by 20" length. Coated with an acid resistant finish. Strong and dependable support. The rods are nickel plated steel and are threaded to fit the base.

American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size #ad - The rods are nickel plated steel and are threaded to fit the base. Made of cast iron.

More information about American Educational 7-G15-A #ad


Similar products



United Scientific SSB6X9 Support Stand with Rod, 9" Base Length x 6" Base Width

#ad
#ad
United Scientific Supplies SSB6X9 #ad - The rods are nickel plated steel and are threaded to fit the base. United Scientific Supplies. Strong and dependable support. Coated with an acid resistant finish. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Bases and Rods are also available individually. Made of cast iron. Stamped steel bases, with black enamel finish.

United Scientific SSB6X9 Support Stand with Rod, 9" Base Length x 6" Base Width #ad - Removable, zinc plated steel rods.

More information about United Scientific Supplies SSB6X9 #ad


Similar products



EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs Opens to 90mm in Dia. with Boss Head

#ad
#ad
EISCO CH0688 #ad - EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs Opens to 90mm in Dia. with Boss Head #ad - Die casted alloy clamp retort, PVC coated jaws with boss head which accommodates rods up to 15 mm in diameter. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Strong and dependable support. Attaches to rods up to 15 mm in diameter. Jaws have a capacity of 90 mm. United Scientific Supplies. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Can mount vertical or horizontal -- rotates on clamp. Coated with an acid resistant finish. Extends out approximately 5" from rod, not adjustable. Made of cast iron. The rods are nickel plated steel and are threaded to fit the base.

More information about EISCO CH0688 #ad


Similar products



OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip

#ad
#ad
OESS #ad - Extends out approximately 5" from rod, not adjustable. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. The rods are nickel plated steel and are threaded to fit the base. Coated with an acid resistant finish. Attaches to rods up to 15 mm in diameter.

Strong die-cast construction. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Maximum width of Jaw opening is 90mm. Can mount vertical or horizontal -- rotates on clamp. 3 prong finger style rubber-Coated Head lab clampBlack lab retort stand bosshead clamp holder Strong and dependable support.

OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip #ad - Covered jaws for protection and grip. 3 finger clamp accepts rods up to 20 mm. United Scientific Supplies. Made of cast iron. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length.

More information about OESS #ad


Similar products



OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip

#ad
#ad
OESS FCBC #ad - Heavy duty 2 finger style rubber-wrapped head lab clamp with black laboratory stand clip, excellent for laboratory use. Attaches to rods up to 15 mm in diameter. Rubber-wrapped jaws will safely protect your glassware from scratching bad. Strong die-cast construction. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip.

The rods are nickel plated steel and are threaded to fit the base. Covered jaws for protection and grip. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Maximum width of Jaw opening is 90mm. 3 finger clamp accepts rods up to 20 mm. Package include:1 pcs 2 finger adjustment lab clamp rubber-wrapped head and 1 pcs black lab stand clipPerfect for laboratory use Strong and dependable support.

OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip #ad - Made of cast iron. Can mount vertical or horizontal -- rotates on clamp. Strong die-cast construction. United Scientific Supplies. Maximum width of Jaw opening is 5cm. Extends out approximately 5" from rod, not adjustable.

More information about OESS FCBC #ad


Similar products



Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia - Laboratory Grade Metalware Set

#ad
#ad
EISCO #ad - Can mount vertical or horizontal -- rotates on clamp. Maximum width of Jaw opening is 5cm. Rubber-wrapped jaws will safely protect your glassware from scratching bad. Heavy duty 2 finger style rubber-wrapped head lab clamp with black laboratory stand clip, excellent for laboratory use. Coated with an acid resistant finish.

Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia - Laboratory Grade Metalware Set #ad - Everything is in one box. United Scientific Supplies. Strong and dependable support. Stainless steel rod with a powder coated base provides the perfect setup for any experiment. Rod length*width:6. 3" *03". Perfect setup for a lab. Attaches to rods up to 15 mm in diameter. Blue powder coated support stand base 8" x 5.

25". Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Covered jaws for protection and grip. 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4.

More information about EISCO #ad


Similar products



American Educational Cast Iron Support Ring Stand with Acid Resistant Finish, 6" Length x 4" Width Base Size

#ad
#ad
American Educational 7-G14 #ad - 3 finger clamp accepts rods up to 20 mm. The rods are nickel plated steel and are threaded to fit the base. Made of cast iron. United Scientific Supplies. 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Strong die-cast construction. Strong die-cast construction.

American Educational Cast Iron Support Ring Stand with Acid Resistant Finish, 6" Length x 4" Width Base Size #ad - Extends out approximately 5" from rod, not adjustable. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Can mount vertical or horizontal -- rotates on clamp. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Base: 6" length by 4" width; rod: 5/16" diameter by 18" length. Maximum width of Jaw opening is 90mm. Perfect setup for a lab. The rods are nickel plated steel and are threaded to fit the base. Covered jaws for protection and grip. Strong and dependable support. Type is coated with an acid resistant finish.

More information about American Educational 7-G14 #ad


Similar products



7pcs PTFE Magnetic Stirrer Mixer Stir Bar Spinbar Stirring White Color

#ad
#ad
Hotodeal #ad - Heavy duty 2 finger style rubber-wrapped head lab clamp with black laboratory stand clip, excellent for laboratory use. Attaches to rods up to 15 mm in diameter. Extends out approximately 5" from rod, not adjustable. Covered jaws for protection and grip. Used to stir a liquid or solution in biological, chemical, medical and research laboratory applications.

High temperature up to 250 ℃, low temperature up to -196 ℃. With acid and alkali resistance, resistant to a variety of organic solvents, almost insoluble in solvents. Stir bars are coated with teflon PTFE covering, built-in pivot axle helps to reduce vibration and wear during stirring. These are brand new, never used, PTFE stirrer bars.

7pcs PTFE Magnetic Stirrer Mixer Stir Bar Spinbar Stirring White Color #ad - Coated with an acid resistant finish. Strong die-cast construction. Coated with an acid resistant finish. Length diameter: 10mm 5mm 12mm 7mm 20mm 8mm 25mm 7mm 28mm 8mm 30mm 8mm 35mm 9mm Strong and dependable support. Made of cast iron. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip.

More information about Hotodeal #ad


Similar products



Thomas Traceable Kangaroo Thermometer, 7.5" Probe Length, -58 to 572 degree F, -50 to 300 degree C

#ad
#ad
Thomas Scientific 4430 #ad - Measures temperature from -50 to 300 degrees c -58 to 572 degrees F, with an accuracy of + or - 1 degree C between -30 and 250 degrees C. The rods are nickel plated steel and are threaded to fit the base. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD.

The company was founded in 1899 and is headquartered in Philadelphia, PA. The unit has a built-in compartment to hold the cable when not in use. It is a registered contractor for the United States Federal Government. The thermometer is traceable to national Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization ISO 17025 levels.

Thomas Traceable Kangaroo Thermometer, 7.5" Probe Length, -58 to 572 degree F, -50 to 300 degree C #ad - 3 finger clamp accepts rods up to 20 mm. Made of cast iron. Strong and dependable support. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals. Thomas scientific manufactures lab supplies, chemicals, equipment, and instruments for scientific research.

Maximum width of Jaw opening is 5cm. Stainless steel rod 23" length, 0

More information about Thomas Scientific 4430 #ad


Similar products



Sciencent Retort Stand Premium Support Stand Rod 20" Acid Resistant, 8" Length x 5" Width Base Size

#ad
#ad
The Punjab Scientific Industries #ad - Maximum width of Jaw opening is 90mm. Rod length*width:6. 3" *03". Calibrated to iso 17025 traceability standards for reliability of measurements. Strong and dependable support. Maximum width of Jaw opening is 5cm. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Heavy duty 2 finger style rubber-wrapped head lab clamp with black laboratory stand clip, excellent for laboratory use. Coated with an acid resistant finish. Set contains corrosion and Acid Resistant Base and Rod for lab experiments. United Scientific Supplies. This premium lab retort stand/ring stand contains a high quality polished Royal Blue base and a Polished Stainless steel rod, which are manufactured keeping laboratory standards in mind and perform very well with lab experiments.

Sciencent Retort Stand Premium Support Stand Rod 20" Acid Resistant, 8" Length x 5" Width Base Size #ad - Perfect setup for a lab. Attaches to rods up to 15 mm in diameter. Stainless steel rod resists corrosion and is 20 inches long. Extends out approximately 5" from rod, not adjustable. The rod comes with a a loose & small grip lever to properly screw it in the base. Powder coated polished Royal blue base measures 8"x5" LxW.

More information about The Punjab Scientific Industries #ad


Similar products